[SOLVED] MSI X2-108 (MS-9238 v3.xx)

[DeathBringer]

Download SYMCMOS and run in DOS:
SYMCMOS –v2 –lOLD.TXT
Post file old.txt

Code:

usage:                                                  
   SYMCMOS <options>                                    
      -?                show this help                  
      -D                program BIOS default values    
      -S[filename]      produce symbolic report file    
      -L[filename]      produce literal report file    
      -U[filename]      update CMOS using script file  
      -C[filename]      combine build files            
      -F[filename]      use combine file for report    
      -V0               disable logging                
      -V1               enable error logging (default)  
      -V2               enable verbose logging          
      -V3               No CMOS update and verbose logging

[SimpsonsFan]

http://klikr.org/2755a9472d755810e86e479f238f.txt

[DeathBringer]

do it again with X5355 and enabled options.
Do not change anything except TM2 & NX bit!

[SimpsonsFan]

Board wont start with X5355 w/o clearing CMOS. I redid dumps with algo: 1 - clear CMOS 2 - setup VIRT/TM/NX 3 - symcmos 4 - change CPU 5 - symcmos

Here results:
X5355 http://klikr.org/6aac409fd3e8d20876d9fefa1f84.txt
X5460 http://klikr.org/058695888ae5bde075ae05cf3193.txt

Sorry for delays, memory test takes forever.

[DeathBringer]

Save symcmos dump for X5355 with name NEW.TXT. Then boot with X5460 run in DOS:
SYMCMOS –v2 –uNEW.TXT
Then press Ctrl+Alt+Del and do not enter in BIOS. Verify NX bit support in Windows by Securable.

[SimpsonsFan]

Yes, with settings from X5355 NX bit is working: http://klikr.org/4d57e334901469b0a04e180173be.jpg

[DeathBringer]

Can you check TM2 ?

[SimpsonsFan]

Have no idea how.

[DeathBringer]

Download Coreinfo, run it command line and post results.

[SimpsonsFan]

Here TM/TM2 are marked as supported http://klikr.org/8c36a87b599b063437391a83e30f.txt