[Unlocked] HP DM3 1010eg - solved

[grabeskuehle]

Manufacturer: HP
- Model : HP DM3 1010eg
- Bios Revision : F.28
- Bios Type : Insyde
- Bios Identification : InsydeH20 Rev3.5
- Bios Link : http://h30638.www3.hp.com/pub/softpaq/sp...p48823.exe
(dumped bios attached:
  Hewlett-Packard-F.28.rom (Size: 2 MB / Downloads: 14) )

   
   
   
   

I never use the security / diagnostic tabs, so those can be used if needed for swapping.
Everything that loosens some of the restraints of the original will make me very happy, so please, help me out
I am especialy interested in undervolting / overclocking options, voltages, fan, deleting any whitelists would be nice too.

I acknowledge the Risks of Modifiying the Bios, and ill test it at my own risk.
Thanks in advance!

[grabeskuehle]

Obsolete - please delete

[grabeskuehle]

As mentioned i am trying to do the unlock myself with this tut: http://donovan6000.blogspot.co.nz/2013/0...-tabs.html

But unfortunately my bios differs in that point where it references those tabs.
The adresses of the tabs are as follow:
Form 'Main' at 0x0004C220
Form 'Exit' at 0x0004C590
Form 'System Configuration' at 0x0004C640
Form 'Diagnostics' at 0x0004CBF0
Form 'Security' at 0x0004CC50
Form 'Power' at 0x0004CD50
Form 'Advanced' at 0x0004D140

So here they get referenced, all of them, and none seem to be bypassed:
               

Here is the only place where just the five shown tabs are referenced, so i guess this is the place i have to mod:
   

But i have no clue what to do now. Any clues, please?

[BDMaster]

As mentioned i am trying to do the unlock myself with this tut: http://donovan6000.blogspot.co.nz/2013/0...-tabs.html

But unfortunately my bios differs in that point where it references those tabs.
The adresses of the tabs are as follow:
Form 'Main' at 0x0004C220
Form 'Exit' at 0x0004C590
Form 'System Configuration' at 0x0004C640
Form 'Diagnostics' at 0x0004CBF0
Form 'Security' at 0x0004CC50
Form 'Power' at 0x0004CD50
Form 'Advanced' at 0x0004D140

So here they get referenced, all of them, and none seem to be bypassed:


Here is the only place where just the five shown tabs are referenced, so i guess this is the place i have to mod:


But i have no clue what to do now. Any clues, please?
[/quote]

Ok friend,
You have done a good job and your Bios permit only Swapping Mode so You have to change Diagnostics with Power or Advanced Tab Reference Offset !

   

[grabeskuehle]

Hooray, its done!

           

Power and Advanced Tabs unlocked!

But now one new problem occurs: If i try to save & exit the Bios, it freezes / locks up, no matter if i changed settings or not.
If i want to exit without saving, it exits, but the screen keeps blank.

This also appeared when just the advanced tab was unlocked.

What to do now?

[grabeskuehle]

Me dummy ^^'
Problem solved, i also had to change the offsets here:        

Now it works!

Here the proper mod file, for other dm3 1010eg users:
  3656F28.zip (Size: 961.54 KB / Downloads: 28)

[brkyrivera]

Tried it works like a charm, great job man. Would you be able to take a wireless and wwan whitelist off the bios, so we can be able to replace wireless card to any other. I have issues with Atheros AR5B95 and would like to replace but cannot because of hp 104 error and whitelist. Can you please help with this? Thanks in advance. Cheers.