lenovo thinkcentre m77 bios problem

[Mohammed Hassan]

Hello
Good day
sorry for my bad english
i have lenovo thinkcentre m77
serial number: MJRGAKB
but its damaged unfortunately
so i take the motherboard a88 and put it in another case with

OS: Windows 7 Ultimate SP1 64bit
CPU: AMD Phenom II x6 1055T
Ram1: KingStone DDR3 1333 4GB
Ram2: KingStone DDR3 1333 4GB
GPU: Gigabyte GTX 1050 TI
PSU: Evga 650w Bronz

the motherboard work very fine but the only problem i have is the ram count
in bios setting it's read all 8GB of ram but in windows read only 4GB and other 4GB is usable please find below files
also i changed the ram places and also update the bios from 9VKT29AUS to 9VKT33A but i have no option to change anything in bios settings exception few option like video memory and some power option and boot sequence
how i can fix this problem and maybe i add another 8GB in future
all i need to skip this problem is change the bios system to have more control or option with ram and cputo activate ( Ram Remapping, Memory Remapping) features
please find pictures in drive also in attachment
https://goo.gl/WycHAL
best regards

[DeathBringer]

Show a screenshot of msconfig under button Advanced options on current OS in Boot tab. E.g.

[Mohammed Hassan]

Show a screenshot of msconfig under button Advanced options on current OS in Boot tab. E.g.


hello DeathBringer
already try this solution
thank you

[DeathBringer]

Attach TXT report of CPU-Z.
Open Device Manager, click View at the top of the Device Manager window, click Resources by type, and then select Memory. This should give you an output similar to the picture shown below

Resize such window to show all information. Make and post a screenshot of it.

[Mohammed Hassan]

Attach TXT report of CPU-Z.
Open Device Manager, click View at the top of the Device Manager window, click Resources by type, and then select Memory. This should give you an output similar to the picture shown below

Resize such window to show all information. Make and post a screenshot of it.

ok sir
give me some time i'm in work right now
and the pc in home
i will upload picture required after go home
best regards

[Mohammed Hassan]

Attach TXT report of CPU-Z.
Open Device Manager, click View at the top of the Device Manager window, click Resources by type, and then select Memory. This should give you an output similar to the picture shown below

Resize such window to show all information. Make and post a screenshot of it.

Here is CPU-Z report and memory resources from device manager


  HPC.txt (Size: 69.11 KB / Downloads: 1)
   

[DeathBringer]

You installed memory in DIMM2 & DIMM4.
Install memory in DIMM3 & DIMM4 and remake TXT report.

[Mohammed Hassan]

You installed memory in DIMM2 & DIMM4.
Install memory in DIMM3 & DIMM4 and remake TXT report.

please find below files
regards

[DeathBringer]

Have you 2Gb (or 1Gb) DIMM and simple graphics card?

[DeathBringer]

How many memory available with such configuration? And with internal graphics only?