my first mod project: Xeon E5410 in a Supermicro X7SBi (Need help)

[ImDion]

Hi, i recently bought a Xeon E5410 for 2.5 euro, and i wanted to mod it into a Supermicro X7SBI, after updating bios, it didnt work.

My Question: I need help from someone experienced , im not good at microcodes and bios modding and would like to learn it, i hope i provided enough info, the motherboard kept beeping when i put the xeon in.

The software i used:
MMFlash (could not read bios file)
The hardware i used:
-E5410
- Supermicro X7SBi
- 1GB Ram
- 300 watt psu


Thanks
ImDion

[DeathBringer]

Have you any CPU than can boot up this motherboard? If you have then post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with such CPU.
Tell sSpec of your new CPU. Do you use sticker-adapter?

[ImDion]

Have you any CPU than can boot up this motherboard? If you have then post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with such CPU.
Tell sSpec of your new CPU.

Yes, i own a proliant G5 i can put it into, but the mod sticker is already on the cpu. will it fit in a lga 771 socket with the mod sticker on?

[DeathBringer]

No, you need old CPU for Supermicro X7SBI. How you updated BIOS without it?

[ImDion]

Ahh i tought you meant the xeons, illl replace it and boot into windows, yes i use the sticker adapter

[ImDion]

No, you need old CPU for Supermicro X7SBI. How you updated BIOS without it?

Its an INTEL  E6850
i updated it using bootable DOS usb stick

[ImDion]

No, you need old CPU for Supermicro X7SBI. How you updated BIOS without it?

Hi,

im installing windows for cpu z right now

here is post screen and cpu photo
http://imgur.com/a/Rzsu8 CPU / Post screen

[DeathBringer]

OK. I still need sSpec of your new CPU (E5410).

[ImDion]

OK. I still need sSpec of your new CPU (E5410).

Uploading them right now

[ImDion]

OK. I still need sSpec of your new CPU (E5410).

Uploaded them, (scroll down the page)
http://imgur.com/a/Rzsu8/