need overclocking in P5GL-MX unlocked past 240 fsb as well as other stuff

[Sean McCargar]

ok weird cant upload the files! they are too large to upload..... ummm if u have a email account that i can send them too! that will work! but i got them anyways!! just need your email and i can send them that way... thanks u

[Sean McCargar]

k well the pictures are too large to post on this page... if u have a email i can send them to you then u can check them out! Got 1 of memtest with 2 gigs and 1 with 4 gigs and a pic of my jumperfree config in my bios and the vcore setting to auto only! So if u got a email ill send them right away thank u for your time!!

[Antinomy]

I was talking about Memset not Memtest

Will be waiting for the update.

[Sean McCargar]

oh really lol damit haha kk will update!

[Sean McCargar]

Hey gurus there is one thing that i was hoping u guys could do too in my bios is making a 3/2 ratio for my ram! All i have for ratio wize is 1/1 and 5/4! I think having a 3/2 ratio for my ram i could achieve a better overclock compared to 5/4, with the 4 gigs installed right now... so that would definatly be a bonus! Thank u again gurus for everything that u have done for me including u antoni!! Thank u!

[Antinomy]

So you've got the idea that 1:1 is useless with a good overclock and DDR1? No, unfortunately, 3:2 is impossible as i915 supports only DDR333 (5:4) and DDR400 (1:1). So set 5:4 raise Trfc and Trd and try again.

---

I've updated the BIOS - got the PCI-E fixed. Should work fine now. A very nasty mistake, bad me. Check that the BIOS in the archive you'll download was modified July, 18 - that's the current.
As for overclocking - do you have option for changing multiplier to 14x in CPU settings? I suggest you to lower Multi and check how high can you memory and board go to be sure you're not CPU limited. In the meantime I'll play with Vcore.

And check, does the Vcore in CPU-Z change when you set Vcore overvoltage?

[Antinomy]

O.K. and now I've looked through the Vcore. It should be fixed right now. Please, check if PCI-E frequency is working good. And check a post a photo of how Vcore works. And use CPU-Z or hardware monitoring in BIOS to check if it changes Vcore at all.

Again, check what does Vcore overvoltage do and try will changing Trfc and Trd timings help in overclocking your memory. Good luck and write back!

[Sean McCargar]

omg antinomy u are dame well amazing!! i will post pics and message back when i check it out just got off work!!!
O and about the 14x... My computer will change to 14x only when c1 is enabled to reduce heat and cpu power usage while in idle mode... i always have that setting turned off becuase of performace degrading while playing hardcore games but there is no where to actually manuall change it from 14x to 16x! even tho im very sure there should be in the cpu settings..
And for the tfrc settings and the trd setting do u have any suggestions to what they should be set at or to be going higher or lower... i figured out my bioses memory settings but not this yet!

---

Ok im just sending u the pics lol u are gona have fun with this one lol! The pci express frequency is working and shows up properly but the vcore says beside it 8 usb ports and is in the exact same location as if i go into usb config lol! check out the pics and when i press enter on it the screen goes black and then i can back out of it! lol but i was wondering what should i set my pci express freqency to? I have a gtx 460 installed in my machine... dont know if that has to do with my graphics card or what but ive never fooled around with pci express freqency. Thanks antoni!! your the best dude!

[Antinomy]

O.K. I've screwed the Vcore. I'll try to find a fix for that. Do you have an option "Ratio CMOS setting" that should allow you to set the multiplier in CPU configuration?

[Sean McCargar]

O.K. I've screwed the Vcore. I'll try to find a fix for that. Do you have an option "Ratio CMOS setting" that should allow you to set the multiplier in CPU configuration?

Ummm not that i know of but ill search around. But im pretty sure i dont.

---

Oh and u might want to know that when i have my 4 gigs at 1/1 ratio and overclocked to 240 fsb, using memtest for windows edition it freezes instantly on allocating the 1024 memory to my computer... That one might give u some type of hint on whats going on but i tried the memory settings u emailed me and niether worked. Went to 5 for trd and 20 for trfc but no luck yet..

---

and there is no cmos settings in my bios... if u want i could send u a pic of my cpu config.