request unlock acer V5 473G insyde or help me do it

[nanoteam]

and about flashing i saw way without flash via linux

start linux via terminal

sudo su

modprobe efivars

this will show efivars and modife them via hex program like ghex

link for tuto http://community.acer.com/t5/Notebooks-N...1423599097

NEEDED EXTERNAL DVD...
BURN MINTLINUX CINNAMON 64BIT
READ ENTIRE DIRECTIONS AND PRINT OFF BEFORE STARTING....
A BASIC UNDERSTANDING OF LINUX OR SOMEONE WHO DOES...SUPER USER COMMANDS ARE FOREVER IF YOU DON'T KNOW WHAT YOU DID OR ARE DOING..

ENTER BIOS
1. Disable UEFI Secure Boot
The Secure Boot Setting is present in the BIOS menu (Hit F2 - while booting or via Windows 8's Enter UEFI Setup). But
in order to change it, one has to set a "Supervisor Password" in the Security Tab within BIOS.
2. Change Boot order so USB CD/DVD is first option
EXIT BIOS
BOOT LIVE LINUX MINT WITH DVD IN DRIVE (SELF EXPLANATORY)
3. Boot into linuxmint-cinnamon-DVD-64bit via UEFI
Booting via UEFI is important because the efi runtime service is not accessible when linux was booted "the old way".
SELECT FIRST OPTION...JUST HIT ENTER AT GRUB LOADER SCREEN
4. System has compatibility issues with graphics SO FIRST SAY NO TO FIRST XSERVER WARNING AND OK TO SECOND..THEN command line opens after errors type in each command
(EXACTLY..UPPER AND LOWER CASE MATTER AS WELL AS SPACES....ENTER after each line)

sudo Xorg -configure
sudo cp /home/mint/xorg.conf.new /etc/X11/xorg.conf
startx

Now graphic display will show...
First find connection icon in lower right of screen and connect to network
(needed to download ghex editor)
4.Access UEFI via a console/terminal
(A BLACK BOX WITH THIS SYMBOL IN IT >_ )
LOCATED BOTTOM LEFT...THIRD ICON FROM MENU..
5. Type in terminal (enter after every line)
sudo su
modprobe efivars
apt-get install ghex
ghex

6. Now ghex editor is running in super user state...be careful and if you don't know what your doing...im not responsible..find someone who does..
UNDER FILE TAB OPEN
NAVIGATE TO File System/sys/firmware/efi/efivars/Setup-a04a.............
(Setup-a04a............ I LEFT THE FULL NAME OFF BUT YOU'LL KNOW WHAT FILE IT IS WHEN YOU SCROLL DOWN)
edit 0X21b and 0X21c
change the 00 to 01 for both

00000210 00 00 00 00 01 00 00 00 00 00 00 01 01 00 00 00

7. exit ghex it will ask you to save....must save..
8. close all windows
9. HOLD POWER BUTTON UNTIL UNIT SHUTS DOWN...MUST...
10. UNPLUG USB CD DRIVE OR REMOVE DISK
11.START UP...PRESS F2 TO ENTER BIOS AND YOU'LL SEE ADVANCED MENUS..
12. BE CAREFUL AND USE AT OWN RISK...RESTORING DEFAULT SETTINGS WILL PROBABLY REMOVE ADVANCED MENUS FROM BIOS...
THANKS AND ENJOY

http://youtu.be/fzuuE0tz6bY
https://www.youtube.com/watch?v=7SkBFkzO...e=youtu.be
https://www.youtube.com/watch?v=fzuuE0tz...e=youtu.be

check out video..

[BDMaster]

Yes my friend,
this was discussed with Donovan6k many months ago !
This is the FalseClock Evolution !:

https://www.bios-mods.com/forum/Thread-R...-EFI-shell

I am happy You posted It so We can open a discussion !
There are three ways to hide the forms (Setuputility Menu Tabs and Options) :

1) by code within the SetupBrowser (Binary Code Instructions)
2) by VSS-Data (inside bios data = VarStore)
3) by Form OP-codes (EFI or EUFI IFR)

So I showed to You the Code Locks !
You shoved the VSS or VarStore (Variables for Settings) and FalseClock do the same !
And some Options We can unhide modifying the UEFI IFR code !

So have You tried this Method ? I haven't an UEFI PC and so far didn't try yet !
My way actualy is the best if Eeprom s not Write Protect, but this one is good too !
Let me Know
Regards

Here there are some links about Falseclock Method :

http://sysmagazine.com/posts/182676/

http://habrahabr.ru/post/182676/

[nanoteam]

i tried it to enable otption like intel vt and i played with turbo clock without succed ... and itried to recover my bios and i succeded so i'm not affraid to modding ... if you can explain to me how to do because i didn't under stood the lines you wrote ... i have knowledge in hex but assembly just little if you can just guide me with tutorial thanks my friend.

[BDMaster]

Ok Friend,
You can use a listed tool :

PMT259 to extract modules (Setuputility) :

http://forums.mydigitallife.info/threads...EFI-BIOSes

CodeRush UEFITool :

http://forums.mydigitallife.info/threads...and-editor

Perl (Language run-time) to run script :

http://www.activestate.com/activeperl/downloads

Script to read EFI IFR and VSS :

http://rghost.net/8VGQKq76L

Donovan6k Universal EFI / UEFI IFR Extractor v.0.6 :

http://donovan6000.blogspot.it/2014/02/u...actor.html

UEFI Shell Hacked :

http://rghost.net/8pJ25wyPV

FlaseClock Tutorial "How To . . ." :

http://rghost.net/6n7PVmLrC

Let me know
When Yuou got all tools !

[nanoteam]

thanks friend but i meant tutorial to apply your mod you gave me ... i understood that thing about hex ... but jump jz i didn't understood

[nanoteam]

and one more thing i tried uefi hacked shell it stays black screen..... scureboot disabled anything ... and i have secureboot problem i can't flash modfied bios even i modfied orignal one to overwrite but no succed when rebooted told me firmware curamped and as i said shell not working it stays black and from linux i think it did nothing i will make sure thanks for help ... acer it is making toooo hard to mod ahhh god help us ..... sorry for my english .

[BDMaster]

I suggest to buy an HW SPI Programmer and I will help to modify completely
your Bios !
May users hve done and They are happy to use It !
Regards

[nanoteam]

what is it and how it works ...and from where i buy