samsung x418 bios ver 05ic

[simsci21@hotmail.com]

please help to put slic2.1 for my samsung x418 bios ver 05ic which has no slic2.1 table to activate windows 7?

official downlink: http://www.samsung.com/us/support/downlo...dDetail.do
bios has been downloaded to: http://www.sendspace.com/file/6ry9gs

Manufactureramsung electronic
Model: np-x418
Bios Type: Phoenix BIOS ver 05IC

attach herein is REPORT ALL...

[1234s282]

Read the rules before posting

We require a link to the official bios download!

Admin

[simsci21@hotmail.com]

pls enlighten me abt this "link to the official bios download!
" that you require?

[simsci21@hotmail.com]

Read the rules before posting

We require a link to the official bios download!

Admin

oops ok.... here it is..
http://www.samsung.com/us/support/downlo...dDetail.do
and,Bios Download Link:http://www.sendspace.com/file/6ry9gs

Manufactureramsung electronic
Model: np-x418
Bios Type: Phoenix BIOS ver 05IC

attach herein is REPORT ALL...

[1234s282]

Here you go , i used Samsung 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Samsung%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[simsci21@hotmail.com]

Here you go , i used Samsung 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Samsung%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

kindly allow me to ask b4 proceed ..

1. any restore plan if fail?
2. just for your info, I have tried loader7 many times and fail to activate due to slic no found. should I try your and are they the same thing?
3. if I would try,dont know where to find OEM SLP Product Key, pls help ...thks

[1234s282]

1. There is a Phoenix bios recovery method called Crisis Recovery Disk , but it doesnt always work!

2.No they are not the same thing , make sure you remove all traces of loaderrs before attempting a bios mod or the mod will fail

3. MDL

Admin

[simsci21@hotmail.com]

Here you go , i used Samsung 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Samsung%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

no, I cant execute at command prompt...
should I reinstall windows?

[1234s282]

Reinstalling wont help!

Click Start Orb , type cmd , right click and then "Run As Administrator" , then execute the command!

Regards
Admin

[simsci21@hotmail.com]

Reinstalling wont help!

Click Start Orb , type cmd , right click and then "Run As Administrator" , then execute the command!

Regards
Admin

hi, I am sorry I dont understand what you mean by click start orb?
thks