12-06-2011, 04:39 PM
(12-03-2011, 04:02 PM)KarlB Wrote:My old card info:(12-03-2011, 12:41 PM)camiloml Wrote: In fact i don't need the new card's ID, it's last resource swapping IDs for me, i normally do fine with the original card's PCI ID to remove whitelist checks.
http://dl.dropbox.com/u/45117524/bios-mo...miloml.exe
Try this one.
to flash it when WinFlash screen is shown, click on Advanced options. After a while a new pop window opens, with 3 tabs, in the Flag tab just mark "Verify block after programming" and "Disable Axx swapping automatic detection". And in DMI tab choose in the dropdown menu "Update the BIOS and not DMI".
Then click Accept, and then Flash BIOS.
and let me know
This also did not work... The "Verify block after programming" and "Disable Axx swapping automatic detection" were already checked but I had to pick the "Disable Axx swapping automatic detection" option and then I flashed.
I still get the error message.
PCI\VEN_8086&DEV_4222&SUBSYS_135B103C&REV_02\4&2F707902&0&00E3
My new card info:
PCI\VEN_8086&DEV_4229&SUBSYS_11008086&REV_61\4&2F707902&0&00E3
Looking for my original (still working) WiFi adapter.
The serches are independant of each other, first VEN & DEV 86 80 22 42 and I uncover 2 instances. Each instance is found in BIOSCOD3.ROM
Offset (h)
00002390 AD 24 86 80 9A 10 FF 02 02 AD 24 86 80 22 42 FF
Offset (h)
00002510 26 81 3B 86 80 22 42 74 18 67 66 26 81 3B 86 80
My second search is for SUBSYS 3C 10 5B 13 and I uncover a single instance found in file MOD_5100.ROM
Offset (h)
0000F300 3C 10 64 13 3C 10 65 13 3C 10 5B 13 3C 10 5C 13
0000F310 3C 10 5D 13 3C 10 5E 13 3C 10 5F 13 86 80 00 10
But I also noticed that the SUBSYS address is incremented by one for the next three sequential addresses.
Offset (h)
0000F300 3C 10 64 13 3C 10 65 13 3C 10 5B 13 3C 10 5C 13
0000F310 3C 10 5D 13 3C 10 5E 13 3C 10 5F 13 86 80 00 10
I have not found any instances where 3C 10 5B 13 86 80 22 42 is listed in it's entirety.
At this point I am unsure if the two VEN & DEV numbers found in BIOSCOD3.ROM have anything to do with the four SUBSYS address found in MOD_5100.ROM
What needs to be changed to get my new card to work?
Any ideas or thoughts?