[REQUEST] Lenovo IdeaPad Z570 (45CNxxWW) Whitelist Removal

[Gamma237]

Hi All, I've also got a Lenovo Z570 and am wanting to install an intel 7260 to enable me to use my 5GHz network.
I'm currently running Windows 7 on BIOS version - 45CN47WW. 
Any help would be much appreciated!

[wenn_u]

@BD Master,
good day! new member here hopefully you can help me flash my bios so I can install new WiFi card on my ideapad z570.
current bios is 45CN38WW and have an intel WiFi card which is not working anymore.

[baer570]

Hi Bios Modder,
I'm struggling flashing my Bios (45CN38WW) to no white list with the one from Camiloml.
It starts but will end-up in blue screen and PC restarts unchanged.
When doing it manually I get message that new and old version is identically and update stops.
Can you help to get Wifi 7260 running.
Thanks

[Maxinator500]

When doing it manually I get message that new and old version is identically and update stops.

/sa key allows to skip all checks, including BIOS version check.
Use "WinFlash.exe /sa /bios /file BIOS.fd" in the folder with Camiloml's mod.

[baer570]

When doing it manually I get message that new and old version is identically and update stops.

/sa key allows to skip all checks, including BIOS version check.
Use "WinFlash.exe /sa /bios /file BIOS.fd" in the folder with Camiloml's mod.

Yes I tried this, but then I end up in the first variant: blue screen and restart of PC unchanged.

[Maxinator500]

The flash driver does not seem to support current Windows. You might try installing the BIOS from Win 7 portable.

[baer570]

Hi again,
okay tried Win7 but does not work either.
Tried also DOS, but will not accept the Bios from Camiloml.
Do you have another solution?
Thanks a lot.

[Maxinator500]

okay tried Win7 but does not work either.

That's odd.
Here's the same solution as for Z575 model: IdeaPad_Z570_45CN38WW.zip. Check Shell folder in the archive.

[baer570]

Hi Maxinator,
thanks for your help, but this Laptop will not accept any BIOS update. I also do not get it crashed..... :-)
I used the option in Shell folder, final feedback after restart is: "PFlash: Read file error - BIOS.WHP"
Regards

[Maxinator500]

I used the option in Shell folder, final feedback after restart is: "PFlash: Read file error - BIOS.WHP"

A posting about this error.

Open the STARTUP file on your flash drive with a text editor, replace fs0: with fs1: and save the file. Then try to boot from the flash drive again.