3 bioses to verify if they are flashable

[grml4d]

i updated 3 mainboards

first is MSI P6NGM-L

https://www.msi.com/Motherboard/P6NGML.h...o-overview

that is a long time i have this MSI product , it had a cpu Core2 Duo E8400 during a long time and with ebay i was able to update the cpu last year .
i found a good site about updating microcodes and followed the tutorial .
I updated: at least three elements of the latest release bios for motherboard MSI P6NGM-L.

The rom modules are:
Device 10de: 07e3
MCP73 GeForce 7050 / nForce 610i 5.73.32.09.15 to version v5.73.32.09.21

Device 10de: 07f8
Name: MCP73 SATA RAID Controller
MediaShield ROM BIOS 10.0.0.34 has version v10.0.0.35

The cpu is an Intel Core 2 Quad Q9550S CPUID 1067A ( SLGAE)
I removed both versions of the microcode for the cpu and also another which is for very old P4 and installs the microcode:
Cpu0001067a_plat00000011_ver00000a0b_da te20100928

the guide i followed is :http://www.delidded.com/how-to-update-cpu-microcode-in-ami-bios/
i uploaded a file having the original named msi.rom and the new bios named msi_jcg.rom plus the new source files

the file is at mega.nz : https://goo.gl/j34tnZ


second and third are made by supermicro

X8DTH-i 

http://www.supermicro.com/products/mothe...8DTH-i.cfm

i learned that best firmware for intel raid controllers is version 11.2.0.1527 it  supports hard-drives with 4k clusters .

i extracted rom modules and saw , by using drag&drop into notepad , the infos about versions , that the rom for intel raid is v10.6.0.1091 and also that one is may be not the best for the mainboard : the one with pci:id 8086:10DE .
in notepad , the module shows :

Copyright © 1997-2007, Intel Corporation 
Initializing Intel® Boot Agent GE v0.0.20
*** DEVELOPMENT BUILD - NOT FOR PRODUCTION USE!!! ***
*** DEVELOPMENT BUILD - NOT FOR PRODUCTION USE!!! ***
*** DEVELOPMENT BUILD - NOT FOR PRODUCTION USE!!! *** 
IBA GE Slot 0000 v0020 PXE 2.1 Build 086 (WfM 2.0)
 RPL!             BXDXESDITSAF

i replaced it with one i found on the web...so i am not "fully" sure it is a good or best replacement , beside it shows :

Copyright © 1997-2007, Intel Corporation 
Initializing Intel® Boot Agent GE v1.2.50 
IBA GE Slot 0000 v1250 PXE 2.1 Build 086 (WfM 2.0) , RPL V1.36
 RPL!             BXDXESDITSAF


X9DAi

https://www.supermicro.com/products/moth.../x9dai.cfm

bios updated with UBU from http://www.win-raid.com/

version of supermicro bios

1 - Intel RST(e) OROM and EFI SataDriver
OROM IRST RAID for SATA - 10.0.0.1032
OROM IRSTe RAID for SATA - 4.1.0.1020
OROM IRSTe RAID for SCU - 4.1.0.1020
EFI IRSTe RAID for SATA - 4.1.0.1020
EFI IRSTe RAID for SCU - 4.1.0.1020

2 - LAN OROM PXE and EFI UNDI - Intel, RTK, BCM, QCA
OROM Intel Boot Agent GE - 1.5.62
EFI Intel PRO/1000 UNDI - 5.5.23


version of updated bios

1 - Intel RST(e) OROM and EFI SataDriver
OROM IRST RAID for SATA - 14.8.2.2397
OROM IRSTe RAID for SATA - 4.5.0.1012
OROM IRSTe RAID for SCU - 4.3.0.1018
EFI IRSTe RAID for SATA - 4.5.0.1012
EFI IRSTe RAID for SCU - 4.3.0.1018

2 - LAN OROM PXE and EFI UNDI - Intel, RTK, BCM, QCA
OROM Intel Boot Agent GE - 1.5.81
EFI Intel PRO/1000 UNDI - 7.3.20


both files with original files are downloadable at :

https://goo.gl/wHR6xB


that would be a pleasure for me to ear feedbacks and if you tell me the updated bioses i made will install and work well or if i did mistakes and can break the mainboards using it .

[grml4d]

i wonder if i will get a reply ?