![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
The motherboard is Microstar MRS600M
The bios link: BIOS
It's an Phoenix - Award WorkstationBIOS v6.00PG bios, I opened it with Award Bios Editor, I can see there's an AHCI4380.BIN under "PCI drivers", yet there is no option to enable AHCI in the bios, the SATA is stuck to IDE mode. The chipset south bridge should be ATI SB600 which I know supports AHCI.
I also extracted the rom _EN_CODE.BIN where I can see there's AHCI mode present but mispelled as ACHI ".ATI SATA Controller.ATI SATA Type .IDE .RAID .ACHI"
edit: Can this be done with modbin6 without risk?
![[Image: 3rz6f43.gif]](http://i.imgur.com/3rz6f43.gif)
![[Image: FuT0nDL.gif]](http://i.imgur.com/FuT0nDL.gif)
So, I tried to modify the menu options with modbin6 to selectable under windows xp, saved the bios and reopened it with modbin6, it doesn't report any error. Is it safe to flash?
The bios link: BIOS
It's an Phoenix - Award WorkstationBIOS v6.00PG bios, I opened it with Award Bios Editor, I can see there's an AHCI4380.BIN under "PCI drivers", yet there is no option to enable AHCI in the bios, the SATA is stuck to IDE mode. The chipset south bridge should be ATI SB600 which I know supports AHCI.
I also extracted the rom _EN_CODE.BIN where I can see there's AHCI mode present but mispelled as ACHI ".ATI SATA Controller.ATI SATA Type .IDE .RAID .ACHI"
edit: Can this be done with modbin6 without risk?
So, I tried to modify the menu options with modbin6 to selectable under windows xp, saved the bios and reopened it with modbin6, it doesn't report any error. Is it safe to flash?
![[Valid RSS]](valid-rss.png "Validate my RSS feed")