Any advice for my motherboard BIOS failure?

[glemzweb]

Hi guys,

I'm new in this forum and I'm very glad to have found this site. I was updating my bios using a USB stick formatted to fat32...in the middle of the update, the beeper beeped a prolonged sound but I just let it stay until the beep turned itself off. Thirty minutes later, the update seems to not working (it's like the computer is hanging/not responding)...I tried to press "CAPS LOCK" on my keyboard and it seems the light is not flicking on/off...Forty-five minutes later I shut the computer off as it looks it wasn't doing anything...

When I turned the computer on, processor fan is working but no display, not a single beep from beeper. My motherboard is Emaxx MCP61D3-iCafe v2.0...I have downloaded the bios file from here http://www.emaxxtech.com/bios/?wpfb_s=IC...ist_page=3

I removed the chip, erased the data, flash the bios from that file above using TL866CS programmer and solder the chip back into the motherboard. I did this steps twice but nothing happend. Please note that I have tried flashing bios a week ago using programmer and it was successful with different motherboard.

My concern is, the bios file from above is in .rom extension, I have read here in this forum (https://www.bios-mods.com/forum/Thread-h...rom-to-bin), ROM and BIN extension are the same except one of the has an extra header and that the bios file is capsulated, in order to get the file working I have to cut out some chunks in the hex code. I'm not very good at it but I'm hoping some expert could enlighten or help me regarding this....

This is the actual look of my motherboard http://easycaptures.com/fs/uploaded/1158/4834951840.jpg I really appreciate any help you can offer.

Thank you very much,

Glenn