Asus Rampage III Extreme - V1601 - Updated OROMs & SlIC 2.1

[huwerion]

Even the result was the same with the USB

http://goo.gl/j0qwfZ

But if you do at other BIOS If you look you to normally success

Sry for my bad english

https://drive.google.com/file/d/0B23k7zL...sp=sharing

try this one... it's the original file in my drive!

http://goo.gl/o7WIXY
The result was the same

How exactly are you trying to update it?

EDIT: I just tried this bios and it works perfectly. Loaded it, flashed it and its running great on my RIIIE.

In the case of me It 's state that not even the BIOS load
It was not a problem when the ZIO Mod BIOS

[huwerion]

https://youtu.be/pvcnhVfd2g4?t=23s

I tried to take this situation in video

[SkOrPn]

https://youtu.be/pvcnhVfd2g4?t=23s

I tried to take this situation in video

Thanks for the video 

OK, you should never flash in a overclocked state, you are only asking for issues doing that. I keep a stock clock defaults profile for flashing from, and several Over Clock profiles for different situations.

Try these steps....

1. Format the flash drive using FAT32 only.
2. Put the BIOS file in the root of the flash drive.
3. Try downloading the file one more time.
4. Set the bios to its defaults i.e NO OVER CLOCK.
5. Try flashing the "other" secondary bios chip instead.

I just downloaded both files from this thread and both flash perfectly fine. I now tried it three times and each time it flashes really nicely. I am using a 256MB Sandisk Cruzer Micro formatted to FAT32, and it never fails to flash (It is my dedicated BIOS flashing flash drive, lol). I never flash when Over Clocked though, never ever, as that can brick the BIOS chip your on or seriously damage some of the hardware components on the board.

[FoX_JLR]

https://youtu.be/pvcnhVfd2g4?t=23s

I tried to take this situation in video

just double checked every single orom file inside the bios... even added a .rar file this time... it HAS to work!!

[huwerion]

https://youtu.be/pvcnhVfd2g4?t=23s

I tried to take this situation in video

just double checked every single orom file inside the bios... even added a .rar file this time... it HAS to work!!

THX!　FoX_JLR
It was successful in one shot in the RAR file

[SkOrPn]

https://youtu.be/pvcnhVfd2g4?t=23s

I tried to take this situation in video

just double checked every single orom file inside the bios... even added a .rar file this time... it HAS to work!!

THX!　FoX_JLR
It was successful in one shot in the RAR file

That is good to hear. 

[DarkFox]

FoX_JLR, thank you for BIOS.
Why Intel ICH10R SATA RAID Controller: v11.2.0.1527? Why not 14.0.0.2198?

[SkOrPn]

FoX_JLR, thank you for BIOS.
Why Intel ICH10R SATA RAID Controller: v11.2.0.1527? Why not 14.0.0.2198?

Probably because all the tests show 11.2 to have the best performance on chipsets from Series 5 up to series 7.

http://www.win-raid.com/t25f23-Which-are...ivers.html
http://www.win-raid.com/t362f23-Performa...ivers.html

[FoX_JLR]

FoX_JLR, thank you for BIOS.
Why Intel ICH10R SATA RAID Controller: v11.2.0.1527? Why not 14.0.0.2198?

Probably because all the tests show 11.2 to have the best performance on chipsets from Series 5 up to series 7.

http://www.win-raid.com/t25f23-Which-are...ivers.html
http://www.win-raid.com/t362f23-Performa...ivers.html

from: http://www.win-raid.com/t25f23-Which-are...ivers.html

"AHCI mode: Good choice for all Intel AHCI systems from ICH7 up to 5-Series Chipsets
RAID mode: Probably best choice for all Intel RAID systems from ICH7R up to 7-Series Chipsets"

[DarkStarZA]

Found this thread after looking for latest updates for my R3E. Not anything to be found on official ROG site. Want to upgrade to Windows 10. Anyone running it on a R3E and is there any issues?

Thanks to OP for the work done. Not something I would try in a million years. Busy downloading now.