Asus Strix G512LV Bios Unlock

[genius239]

You could make a dump again ,if you're worry.

[ROGSKILL]

---

Hello @all... I am new to this forum....

I see alot of great work here...

My setup:
Asus ROG STRIX G512LV on firmware 314 running a pair of G.Skill F4-3200C18D-32GRS at JEDEC specs ( 22-22-22-52-74@3200Mhz@1.2volt).

would be great if @genius239 could unlock my BIOS to make it possible to set manually the specs of the XMP-Profile ( 18-18-18-43-61@3200Mhz@1.2volt) and many other good things like setting the Volt for the RAM ( I checked in AMIPBC that it supports up to 1.65v ) and any kind of cpu setting... core PL1 TDP and alot of things in this cpu overclocking menu.

I am running Win10 Home ( there is no option for Bitlocker )

Thanks in advance

My dump-file:

---

  dump.rar (Size: 6.79 MB / Downloads: 8)

[genius239]

@ROGSKILL

1. Tell you a cruel fact ,even if you could load xmp profile in the bios or your memory module is ddr43200 ,the maximum memory freq will still be locked at 2933mhz by imc ,because of the processor configuration on this laptop is i7-10870H or 10750H ,only above I7-10875H can over this restriction. But if you consider the temperature and loading problem ,2933mhz is the best choice.

2. Laptops don't allow user oc processor.

3. Bitlocker is not a bios option ,please google its information and attempt to disable it temporary.

Here is a sample that load xmp file then arrive at ddr3200 in g732lws.
https://239239.blogspot.com/2021/01/G732...rvolt.html

[ROGSKILL]

@ROGSKILL

1. Tell you a cruel fact ,even if you could load xmp profile in the bios or your memory module is ddr43200 ,the maximum memory freq will still be locked at 2933mhz by imc ,because of the processor configuration on this laptop is i7-10870H or 10750H  ,only above  I7-10875H can over this restriction. But if you consider the temperature and loading problem ,2933mhz is the best choice.

2. Laptops don't allow user oc processor.

3. Bitlocker is not a bios option ,please google its information and attempt to disable it temporary.

Here is a sample that load xmp file then arrive at ddr3200 in g732lws.
https://239239.blogspot.com/2021/01/G732...rvolt.html

My 512LV is running on default at 3200mhz on the RAM and has a 10870H.


Bitlocker is a Windows option and not supported by windows 10 home, only Windows 10 pro supports Bitlocker.

[genius239]

@ROGSKILL

1. So , you could arrive at ddr43200 ,it seems 10870h can did this ,too or it included in ASUS's white list.


2. Xmp profile is one or several stored information in memory spd ,how do you edit it?? Desolder spd chip from memory module???
Or do you mean you wanna manually tune memory parameters?

[ROGSKILL]

The RAM that I bought, has the XMP Profile included. So the only thing that I need is to be able to set the timings in the BIOS manually or to be able to enable the XMP profile in the BIOS.

So it would be great, if you can modify my BIOS like this: "Here is a sample that load xmp file then arrive at ddr3200 in g732lws."
https://239239.blogspot.com/2021/01/G732...rvolt.html
and please unlock the Voltage configuration for the RAM.

thank you in advance.

I will donate you after and post all BIOS settings of the custom BIOS

[genius239]

I have goes and returned between hospital and home every days on last week. Because my big brother was hospitalized. So ,i don't have time to do bios modifications and i feel so tired. Now he was got out the hospital and back home to recuperate, so i think i have a little while to do mod.

@ROGSKILL
Your mod was done~check the PM.

[ROGSKILL]

thank you so much and I wish your brother a fast recovery!

I will post screenshots and thoughts about the mods.

Best regards

[ROGSKILL]

hello genius239...

it didn't worked for me. Check the picture.

Under grub, everything was fine. Only in windows it didn't worked.

[genius239]

@ROGSKILL

Follow my instruction ,100% can re-flash the mod. My previous g512lv mod is for @Kay123 , he was able to flashed mod no any problems and got menus unlocked. The only one possible problem is something wrong with change variables under Grub. Please send grub operation screenshots to my private message.