![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
10-20-2025, 05:27 AM
Hello everyone, I'm new to the forum.
I have a BTC79X9 board
Socket 2011 (v1/v2)
Ami BIOS - mx25l6436E
bios
AmiBCP versions 4.53/4.55
Problem:
On any processor, there are only 2 cores (4 cores in total).
Setting the Active Core Processor via AMI BCP bricks the board (I have a programmer and a number of boards, so we can experiment).
What I've already tried:
AMIBCP settings + Firmware update - brick
I set ALL (Active core processor) to 0 - the cores clearly started working (this was evident from the heating), but the board won't boot.
There's no post-processor card yet, but it will be soon.
![[Image: 1743743289182_bulletin]](https://static.baza.farpost.ru/v/1743743289182_bulletin)
I have a BTC79X9 board
Socket 2011 (v1/v2)
Ami BIOS - mx25l6436E
bios
AmiBCP versions 4.53/4.55
Problem:
On any processor, there are only 2 cores (4 cores in total).
Setting the Active Core Processor via AMI BCP bricks the board (I have a programmer and a number of boards, so we can experiment).
What I've already tried:
AMIBCP settings + Firmware update - brick
I set ALL (Active core processor) to 0 - the cores clearly started working (this was evident from the heating), but the board won't boot.
There's no post-processor card yet, but it will be soon.
![[Valid RSS]](valid-rss.png "Validate my RSS feed")