Dell Latitude D800 A13 Dell 2.1 SLIC

[Cosinus]

Hi,

I'm looking for Dell Latitude D800 bios version A13 with slic2.1

Link to bios :
http://ftp.dell.com/bios/D800_A13.exe


Thanks a lot !

[1234s282]

This is a Requirement with Each Difficult Phoenix/Insyde Mod Request .

How To Create An RW Everything Report

Download and Install RWEverything from one of the following links:
http://jacky5488.myweb.hinet.net/
http://jacky5488.myweb.hinet.net/bin/RwV1.4.zip
http://slics.myftp.org/Tools/RwV1.4.rar

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this Report to the desktop WITHOUT CHANGING THE NAME and either attach this file to

your post or upload it to one of the following:
http://www.box.net or http://www.mediafire.com or http://www.sendspace.com

If you upload your RWEverything Report to one of the 3 host servers above, post the download link of

your RWEverthing Report in the Post of your Mod Request.

Below is the preferred method in which to post your mod requests:

-Manufacturer:
-Motherboard Model:
-Bios revision:
-Bios Type:
-Bios Download Link:
-RW Everything Report Download Link:

Regards
Admin

[Cosinus]

Hi, here is the report

-Manufacturer: DELL
-Motherboard Model: DELL D800
-Bios revision: A13
-Bios Type: PHOENIX
-Bios Download Link: http://ftp.dell.com/bios/D800_A13.exe
-RW Everything Report Download Link: http://www.mediafire.com/file/nyemnnmmcxu/AcpiTbls.rw

Regards
Cosinus

[1234s282]

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Dell%20La...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[Cosinus]

Hi,

Thanks a lot, it works !

cosinus

[mikeherriman]

Hi,

I also have a D800. I downloaded and flashed with the file in the zip file. However, when I use RW Everything again after the flash, there is no SLiC tab showing up in the ACPI Table. Is this normal?

Any help would be great!

Thanks Alot

[1234s282]

Hi,

I also have a D800. I downloaded and flashed with the file in the zip file. However, when I use RW Everything again after the flash, there is no SLiC tab showing up in the ACPI Table. Is this normal?

Any help would be great!

Thanks Alot

Screenshots from the below tool would be appreciated (all tabs please)

http://dl.dropbox.com/u/747181/SLIC_Dump_ToolKit.EXE

thanks
Admin

[mikeherriman]

I tried it again, and it worked like a charm. I was trying to flash from windows the fist time around, but flashing from DoS seemed to do the trick.

Windows 7 activated and genuine!

Thanks.