ECS G31T-M (V1.0) - SLIC 2.1 BIOS Mod Request :)

[aznphatb0i]

Manufacturer: ECS
Model: G31T-M (V1.0)

BIOS Link: http://download.ecsusa.com/dlfileecs/bio..._10100.zip

BIOS Info: AMI BIOS, Version - 10/02/25, Release Date - 2010/03/17, 10/100 version

NOTE: There is a "For Giga Lan" and "For 10/100 Lan" version of this BIOS. This request is for the "For 10/100 Lan" version. The "For Giga Lan" version can be found here. To my knowledge the G31T-M (V1.0) has 10/100 LAN so I do not know what the "For Giga Lan" BIOS is intended for.

Requesting SLIC v2.1

Thank You!

[1234s282]

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/ECS%20G31...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[1234s282]

oh and most likely the difference in lan is probably just a different LAN option ROM in that bios - the actual bios will be the same!. Just if you flash the wrong one the LAN wont work (Probably 10/100 LAN has a different LAN Chip to the Giga Lan)

Admin

[aznphatb0i]

Thank you very much. The BIOS flashed successfully with the HP SLIC.

oh and most likely the difference in lan is probably just a different LAN option ROM in that bios - the actual bios will be the same!. Just if you flash the wrong one the LAN wont work (Probably 10/100 LAN has a different LAN Chip to the Giga Lan)

Admin

Agreed, however this is curious because the ECS G31T-M (V1.0) is only available with a 10/100 chip, not a giga chip...