ECS P4M890T-M: Support for Q6600 & E7500

[DeathBringer]

Well
Test 5th mod with E7500 only.

[Zambezy76rus]

Well
Test 5-й мод только с E7500 .

with the 5th BIOS not the motherboard does not start with E7500 wolfdale (post code C 2) ... C Core e4300 works ...

[DeathBringer]

OK. Try 6th mod.

[Zambezy76rus]

OK. Try 6th mod.

Great! Flashed and everything worked! The processor is running at its normal frequency! The power consumption functions are also working!

[DeathBringer]

Nice news!
Now flash 7th mod.
At first check it with E7500: TS Bench, SpeedStep and regedit.
Then make DOS USB-stick (e.g, by Rufus) and try to boot with Q6600 in native DOS.

[Zambezy76rus]

Nice news!
Now flash 7th mod.
At first check it with E7500: TS Bench, SpeedStep and regedit.
Then make DOS USB-stick (e.g, by Rufus) and try to boot with Q6600 in native DOS.

flashed! Core e7500 started ,went to Windows , but does not reset the frequency in idle... Core q6600 started ,but freezes on Post code B1 ... And Yes,with the Wolfdale processor installed, the motherboard hangs for a very long time (about 2-3 minutes) on this post before it finds the SSD drive installed in it (the display shows a black screen and a flashing white cursor _) . With the e4300 installed, this procedure takes just 10 seconds...

[DeathBringer]

Core e7500 started ,went to Windows , but does not reset the frequency in idle...
And Yes,with the Wolfdale processor installed, the motherboard hangs for a very long time (about 2-3 minutes) on this post before it finds the SSD drive installed in it (the display shows a black screen and a flashing white cursor _).

Were there such problems with the 6th mod?

[Zambezy76rus]

Core e7500 started ,went to Windows , but does not reset the frequency in idle...
And Yes,with the Wolfdale processor installed, the motherboard hangs for a very long time (about 2-3 minutes) on this post before it finds the SSD drive installed in it (the display shows a black screen and a flashing white cursor _).

Were there such problems with the 6th mod?

No! Everything worked perfectly in the Windows! But long loading of Windows is present on all BIOS with the Wolfdale processor installed

Although I personally do not see anything wrong with this ,because the motherboard reads both Sata SSD with OS and USB with FreeDOS

[DeathBringer]

does not reset the frequency in idle...

Are you sure that isn't ThrottleStop issue?

Try to flash 8th mod and check it with Q6600.

[Zambezy76rus]

Вы уверены, что это не проблема ThrottleStop ?
Попробуйте прошить 8-й мод и проверить на Q6600 .

No! I first delete the .ini file . Double-check using AIDA and Cpu-z... Now I will sew 8 mods