ECS RC410L/800-M2: Wolfdale support

[Malki]

Dear @LosSantosPro,
Good day.

Pls look at supported CPU list for motherboard ECS RC410L/800-M2 https://www.ecsusa.com/ECSWebSite/Produc...-Intel-RR-

You have added microcode for C2D processors, I think it won't work, cuz all of it are based on core "Wolfdale" and C2D FSB is 1333 (unsupported by MB). Link here https://cpu-list.com/cpu-list-lga775-lga771/

Look at Pentium Dual-Core E5800 / E5700 / E5500 / E5400
These CPU's FSB is 800 (supported by MB), but also based on core "Wolfdale".

How do you think regarding that core "Wolfdale", can you add support into bios for that MB ? If yes, we can put cpu's E5800 / E5700 / E5500 / E5400 and they should work.

[DeathBringer]

Malki
Post a screenshot of third (Mainboard) tab of CPU-Z.

[Malki]

Malki
Post a screenshot of third (Mainboard) tab of CPU-Z.

Hello. Attached.

[DeathBringer]

Current BIOS hasn't support for Conroe & Wolfdale
Adding microcode will not add this support.

[Malki]

So, the only way to change the motherboard.
Thank you for your support!

[DeathBringer]

You can use dual-core Pentium D.

[Malki]

Yeah, hope one if this should works: Pentium D 930 / 935 / 940 / 945 / 950 / 960
95W version only (not 130W)

[DeathBringer]

Don't buy Pentium D 9x5 - they haven't VT-x support.

[Malki]

Whoa, thank you for clarification!

So, I should find and buy the one from the following list:
Pentium D 960 (D0) (95W) - SL9K7
Pentium D 950 (C1) (95W) - SL95V
Pentium D 940 (C1) (95W) - SL95W
Pentium D 930 (C1) (95W) - SL95X