Gericom X5 Bios - mod

[Beniu33]

Hello
I have an old Gericom PC with Amibios
Could someone mod this bios for me ?
i need change the processor and microcodes are nedded
org processor T2130 and would change to T9300
could also change the sata speed to sata II,wlan,battery whitelist
just do everything you can with this bios.

[DeathBringer]

Post a screenshot with Mainboard tab of CPU-Z.

[BootlegScarce]

Hello
I have an old Gericom PC with Amibios
Could someone mod this bios for me ?
i need change the processor and microcodes are nedded
org processor T2130 and would change to T9300
could also change the sata speed to sata II,wlan,battery whitelist
just do everything you can with this bios.

CPU upgrade is not possible as the T2130 is Socket M and T9300 is Socket P, fastest you can upgrade to is a T7600.
Also, from my digging through AMIBCP, I can't find any hidden options to unlock on this laptop.

[Beniu33]

Post a screenshot with Mainboard tab of CPU-Z.

Hello

I'm sorry but I had to go away for a few days.
Attached are the photos you asked for
thank you

[DeathBringer]

Yes, BootlegScarce was right:

CPU upgrade is not possible as the T2130 is Socket M and T9300 is Socket P, fastest you can upgrade to is a T7600.

[Beniu33]

Yes, BootlegScarce was right:

CPU upgrade is not possible as the T2130 is Socket M and T9300 is Socket P, fastest you can upgrade to is a T7600.

ok, I will buy T7600.

the only question is whether the bios needs to be modified for this T7600?

Thanks

[DeathBringer]

No, BIOS does not need to be modified.

[Beniu33]

Hi

As you suggested, I changed the CPU to T7600
Unfortunately, another problem arose
the cpu only runs at 1GHZ in low state and under load
there are no settings for this in the bios
what could be done?

[DeathBringer]

Go to BIOS and do Load Defaults, save and reboot.
Make a screenshot of ThrottleStop (main window) with running TS Bench.

[Beniu33]

Go to BIOS and do Load Defaults, save and reboot.
Make a screenshot of ThrottleStop (main window) with running TS Bench.

Thank you very much
After set the default setup in the BIOS works fine 2326.76MHz
one more time thank you