Gigabyte GA-965P-DS3 (rev. 2.0) With HP 2.1 SLIC

[madweegie]

Could someone please mod this bios with Slic 2.1 For Win7

- Motherboard Manufacturer and Model : GIGABYTE GA-965P-DS3 (rev. 2.0)
- bios revision: F14
- Bios Type : Award
- Bios Link = http://www.sendspace.com/file/2df9r5
- Homepage http://www.giga-byte.com/Support/Motherb...uctID=2424



Thanks in advance

Weegie

[alexbezerra]

HP Slic 2.1 For Win 7

http://www.mediafire.com/?jdwyjyo2bjt

Flash at your own risk!

[madweegie]

thankyou

[madweegie]

Just tried this and it hasnt worked ?

Flashed bios, put in OEM ultimate key when asked.. now got 3 days to activate ?

[alexbezerra]

Just tried this and it hasnt worked ?

Flashed bios, put in OEM ultimate key when asked.. now got 3 days to activate ?

1. Copy and paste HP.XRM-MS file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\hp.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt: slmgr.vbs -ipk 22TKD-F8XX6-YG69F-9M66D-PMJBM and hit the Enter Button. Be Patient and wait for the message to say that the Product Key was sucessfully installed. (This Product Key is for Vista Ultimate). After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

[madweegie]

ok i see where i went wrong mate! thankyou for this great support.

i have activated it using an activator from HaZaR! and worked fine ... as paniced with this 3 day to activate thing, is there a way i can remove this activator ?