Gigabyte P35-DS3 v1.0 F12 Gigabyte SLIC 2.1

[daerer]

Yes, Admin

I only search and find "Gigabyte P35-DS3P v1.0 F9 & F12 HP 2.1 SLIC".

Official GA-P35-DS3 (rev. 1.0)
http://america.giga-byte.com/FileList/BI...s3_f12.exe
http://europe.giga-byte.com/FileList/BIO...s3_f12.exe

URL: http://www.gigabyte.com.tw/Support/Motherboard/BIOS_DownloadFile.aspx?FileType=BIOS&FileID=13278


Is there any SLIC 2.1 for Gigabyte P35-DS3 v1.0 F12?

Thanks

[1234s282]

Please post a link to your bios and we will happily mod it for you.

Admin

[daerer]

Added

[1234s282]

Here you go , i used Gigabyte 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Gigabyte%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[daerer]

Success !

BIOS is FLASHED to slic 2.1, Everest ultimate 5.30 checked.
Is GIGABYTE-GBT-2.1.XRM-MS(in Gigabyte P35-DS3 Rev 1.0 F12 Gigabyte 2.1 SLIC By 1234s282.zip file) for HP?

Thanks a lot!

[1234s282]

The GIGABYTE-GBT-2.1.XRM-MS file has to correspond with the SLIC in your bios. Your bios now has a Gigabyte 2.1 SLIC table , so in order to activate tyo have to use GIGABYTE-GBT-2.1.XRM-MS which is the Gigabyte 2.1 certificate file

Glad it works for you

Regards
Admin