HP 6710b GC016ET Wifi whitelist removal - sp55553

[yakka]

Hello guys,

Since I upgraded my second laptop with W10, I have an issue with WIFI (3945ABG is incompatible with W10).
Bios version is F.20 and is inside the SP55553 attached file.
Could you please remove the WIFI whitelist?

PCI id from old WIFI card:
PCI\VEN_8086&DEV_4222&SUBSYS_135C103C&REV_02
PCI\VEN_8086&DEV_4222&SUBSYS_135C103C
PCI\VEN_8086&DEV_4222&CC_028000
PCI\VEN_8086&DEV_4222&CC_0280

Thanx

Yakka

[yakka]

Hi guys, any help?

Thanx

[BDMaster]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

let me know
Regards

[yakka]

Sorry for late answer I forgot to subscribe to this post and didn't see your answer, I will that as soon as my son will "allow" me to access to his computer :-D (he is "addict" to League of Legends).
For your information, AVAST put the second exe in quarantine, strange...

[yakka]

Hello,

Here are the files.

thanks again for your help

[yakka]

Up ;-)

[BDMaster]

I will give a look , but It seems to be an older HP Bios modding by ADDCC tool and
very complicate !
Regards

[yakka]

Sorry for that!

Thanks

[BDMaster]

Ok mate,
this is an old Bios ROMPack type and Moddable only using
ADDCCv3 and most complicated to get right checksum and not Brick !
I can send an older version F.16 sp50197 but to flash It You have to try to
Downgrade !
The bricking risk is elevated so let me know what do You want to do !
I suggest to get the Tools (SPI PGM + Clip) to make the Full Dump Firmware
to recover anytime your laptop and then make the test !
Let me know
Reagards

[yakka]

It is too risky !
I allready changed the bios chip one time on this PC and I have no access to the hardware I used to solder it.
I will let this computer with W7, because W10 has an issue with its Wifi board.
Thank you for the answer