Help E-5 2683 V4 ES help with Supermicro X10

[powertrade]

Hello this is my first post and really need help.  Been over month still cant solve issue.

Do I need a modded bios to solve this problem?  I hope I can be helped.



I have a Supermicrio X10DAL-i   motherboard. Bios rev 2.0b  latest.
I have not changed anything in the bios settings.

I have 2 of the same identical chips. ES chips.
Xeon E5-2683 v4 ES Broadwell-EP same stepping etc..

when I put either chip in the 1st chip slot i can boot to windows10 no problem.

When i add a 2nd chip i get black screen no post no sound.

I even got another Supermicro X10DAL replaced by Supermicro and still no solution.
I even removed components to minimal specs, like ram, graphics card etc...


Here is my setup:


1. Supermicro X10DAL-1 (latest bios 2.0 from supermicro)
2. G.SKILL Ripjaws 4 series 32GB (4x8GB) DDR4 2400Mhz DIMM F4-2400C15Q-32GRK
3. 2x MSI RX 470 4gb both installed running.
4. 1 Xeon E5-2683 v4 ES Broadwell-EP (2nd cpu not installed still)
5. Raidmax 850watt PSU
6. 1TB hard drive Sata

Thank you all.

[DeathBringer]

Tell sSpec of your Xeons.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with one CPU.
P.S. In most cases the latest versions of BIOS aren't recommended for ES CPU using.

[powertrade]

Tell sSpec of your Xeons.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with one CPU.
P.S. In most cases the latest versions of BIOS aren't recommended for ES CPU using.

Ok I will get this information today and post it  up.

Thanks for the Help!  be back soon!

[powertrade]

Tell sSpec of your Xeons.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with one CPU.
P.S. In most cases the latest versions of BIOS aren't recommended for ES CPU using.

Hello here is the info:

sSpec on both Xeons   [b]QHUY 2.00

[powertrade]

Tell sSpec of your Xeons.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with one CPU.
P.S. In most cases the latest versions of BIOS aren't recommended for ES CPU using.

oops i dragged and dropped...  here is attached..

sSpec  QHUY  2.00   both chips

[powertrade]

sSpec QHUY 2.00

both chips are ES Xeon E-5 2683 v4

[DeathBringer]

This CPU is undocumented. Does it support multiprocessing?

[DeathBringer]

Try previous version of BIOS:
R 2.0 - X10DAL5_C18.ZIP
R 1.0 - X10DALI5_306.ZIP