Login

Oldskoolmaniac · 01-14-2018, 06:36 PM

My other cpu is this http://www.cpu-world.com/sspec/SL/SL4BS.html

***DeathBringer*** · (This post was last modified: 01-15-2018, 01:50 AM by DeathBringer.)

(01-14-2018, 06:36 PM)Oldskoolmaniac Wrote: My other cpu is this http://www.cpu-world.com/sspec/SL/SL4BS.html

Try that trick with native BIOS and this Coppermine's CPU.

Oldskoolmaniac · 01-15-2018, 02:53 PM

The injection says this cpu is not supported

***DeathBringer*** · (This post was last modified: 01-15-2018, 02:58 PM by DeathBringer.)

(01-15-2018, 02:53 PM)Oldskoolmaniac Wrote: The injection says this cpu is not supported

I need a photo.
Did you replace the file pep.dat?

Oldskoolmaniac · 01-16-2018, 12:04 AM

yep, i did

***DeathBringer*** · (This post was last modified: 01-16-2018, 02:30 AM by DeathBringer.)

This Coppermine's CPU doesn't boot with my my second mod too, am I right?
Try to flash my 3rd mod.

Oldskoolmaniac · 01-16-2018, 09:21 AM

all cpu's boot with ur second mod, it just the new cpu micro code did not show up when the tualatin was plugged in

***DeathBringer*** · (This post was last modified: 01-16-2018, 09:26 AM by DeathBringer.)

(01-14-2018, 04:17 PM)Oldskoolmaniac Wrote: It would not boot with this one, hard drive light on though

(01-14-2018, 04:22 PM)DeathBringer Wrote: Try other CPU.

(01-14-2018, 04:30 PM)Oldskoolmaniac Wrote: I did...

(01-16-2018, 09:21 AM)Oldskoolmaniac Wrote: all cpu's boot with ur second mod, it just the new cpu micro code did not show up when the tualatin was plugged in

Second or 3rd mod?

Oldskoolmaniac · 01-16-2018, 05:00 PM

the third mod boots just fine with both processors

***DeathBringer*** · (This post was last modified: 01-16-2018, 11:19 PM by DeathBringer.)

Install your PIII-S(Tualatin) and post a screenshot of regedit with expanded key HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0

Login
Username:
Password:	Lost Password?
	Remember me