LG S1 QP55V Whitelist removal (Phoenix)

[camiloml]

http://www.mediafire.com/?xyknyb1ajsh5q5i

This is modded bios.

I think you better try phlash16 package and let it make a bios backup in WPH format.

http://www.mediafire.com/file/l46ndmx43h...lash16.rar

Try this.

Code:

Phoenix Flash Utility for DOS - Version 1.6.8.4 Copyright (c) Phoenix Technologies Ltd., 2000-2007 USAGE: PHLASH16 [options] [@rspfile] [romfile] romfile Override the default BIOS image name BIOS.WPH with "file". @rspfile Response file containing more options /A:address 32 bit address where to put the File Image. /B:file Override the default BIOS image name BIOS.WPH with "file". /BBL Program boot block. ***/BU[=name] Backup flash memory into BIOS.BAK before programming. If "name" specified, override the default filename BIOS.BAK.*** /C Clear CMOS checksum after programming. /CS Verify BIOS.WPH image checksum. /DMC:string Specify chassis manufacturer DMI string. /DMM:string Specify motherboard manufacturer DMI string. /DMS:string Specify system manufacturer DMI string. /DOxx:string Specify OEM DMI string number xx. /DPC:string Specify chassis asser tag number. /DPM:string Specify motherboard product ID DMI string. /DPS:string Specify system product ID DMI string. -- More -- /DSC:string Specify chassis serial number DMI string. /DSM:string Specify motherboard serial number DMI string. /DSS:string Specify system serial number DMI string. /DUS:string Specify UUID DMI string. /DVC:string Specify chassis version DMI string. /DVM:string Specify motherboard version DMI string. /DVS:string Specify system version DMI string. /DESC Check the descriptor mode. /DEV Display device information from WPH file. /EXIT Exit without rebooting. /E2 Generate a new UUID when current UUID is (FFF...FFF). /H or /? Help screen. /I Verify image size matches flash part size. /MODE=n Specify mode n (0, 1, 2, 3). /MFG Manufacturing mode - Automatically reboot without keypress. /N Program only if BIOS.WPH is different than system BIOS. /NOB Do not allow an older BIOS to be flashed to the platform. /NIC Update network controller driver with *.lom files. /NOBIOSINFO Do not display BIOS date and part number while flashing. /O Override (disable) all options from BIOS.WPH. /P Production mode (minimize messages and delays). -- More -- /PF=string String to pass on to command line. /PN Program only if same BIOS part number. /REMOTE Specify remote operation over RS232 /RO[=name] Read contents of flash part and save to a file. /R=n Retry flashing a block n times if flash fails. /S Silent operation (turn off speaker). /SWAP=NO Disable Axx autodetection. /T Show debug timing info (Warning: flash is done TEN TIMES!) /V Verify each block after programming it. /VBL Show warning for Vista Bitlocker. /VGA Update VGA module with *.dat files. /X Ignore XMS memory manager check. /Z Zero before erasing a block. /UUID Generate a new UUID . /DOSKEY Ignore DOSKEY check . /Mod:filename Update current system BIOS with the module specified by filename. /Fbin:filename Update current system BIOS DMI with the interface file specified by filename, do not need image file. /FileUUID Generate a new UUID to BIOS image(Will not flash). /ShowFileUUID Show UUID of a BIOS bin file. To update entire system BIOS you also need the following file: BIOS.WPH (the interface file with the BIOS image)

I remmarked the /BU command that is used to make bios backup.

If this tool can make bios backup upload it, and don't use the file i sent you. I will mod that backup and this same tool should be able to flash it back.

This requieres booting to DOS.

[marmeladov]

I've created a DOS bootable usb-stick and copied the files to the root of the drive.
But somehere I do wrong.
from c:\ I run the command "phlash16 /BU" but only get "File Open failed on c:\bios.wph" as result.
What am I doing wrong?
Feels like it tries to open a file instead of writing a new file based on the already installed BIOS-file.

Sorry for beeing such a noob, this is way above my head actually, but kinda fun aswell

[camiloml]

Hmmm seems it need the name of a bios to be flashed before making the backup.

Rename the bios you have to Bios.wph and copy it together with phlash16

Then run

Phlas16 /BU bios.wph

[marmeladov]

Copied and renamed the bios-file I have.
Named it to bios.wph
Booted up in Dos and ran "phlash16 /bu bios.wph"
But still no luck.
I get the error message: "File open failed on BIOS rom file".

Maybe the phlash16 application is unable to backup my bios to a wph-file and I have to use the first mod of my bios you created?

Do you think I might risk to brick the PC if I use your modded bios-file in combination with this method - http://bios-mods.com/bios-update/ ?
IF I manage to brick it, is it possible to restore bios with original rom I attached in my first post?

[camiloml]

That decission is up to you.