Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 3 Vote(s) - 4.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lenovo ThinkCentre M52 (8114 & 8215) & A52 (8153): Core 2 Duo Support
#1
hey Genius239! i have an IBM board with Phoenix BIOS which does not supports dual core and core 2 duos. can u inject microcode for CPUID=6fd and for CPUID=6f2 (i.e for Dual Cores and Core 2 Duos) plz plz plz.....because its Chipset D945G supports core 2 duos and dual cores but my board's BIOS restricted it!!
Link For My BIOS is:
http://download.lenovo.com/ibmdl/pub/pc/...y46usa.exe

i have tried multiple times to inject microcodes with cbrom but failed all the time.
find
quote
#2
Hey Guys!

I m new to this forum.
I have IBM 8114 Board with D945G chipset having LGA 775 socket but unfortunately it is restricted to Pentium 4's and Pentium D's only. I have tried many times to inject microcodes for CPUID=6fd and 6f2 using cbrom but failed all the time, because cbrom doesn't even show BIOS info it just hangs....!

Can anyone mod my BIOS with these two microcodes and sent it to me please??
My BIOS Link:
http://support.lenovo.com/us/en/downloads/ds000714
find
quote
#3
Hello!

Using this $image2e.usf to replace original ,and try to flashing it!!
I already inject micro code you need ,but i can't sure if it can pass the flash utility,you
need to test it .

you need in here:
https://mega.co.nz/#!rpQTmbwQ!YByVN3VUm_...0Pa7hsYpTo
find
quote
#4
Thank You so much genius239!!
i will check it as soon as possible but there is a little problem here dude i m currently using an Intel Pentium D 945 3.40ghz 4mb processor which has a CPUID F44 i think and this CPUID is not there in $image23.usf file which you gave me..so in my view when i flash my bios this pentium d wont start up, am i right ????? so what do you think what should i do?
find
quote
#5
genius239 can you tell me what software r u using for adding microcodes plz??? and also send me the link for that software with tutorials on how to use that software plz... bcoz i m having one more problem dude. u have added microcodes for cpuid 6f2 and 6fd but i also need to add these microcodes also:
1.F44 or F65 for pentium d (don't know which one)
2.6F4.
3.6F5
4.6F6
becoz higher core 2 duos have cpuid 6F5 and 6F6.
find
quote
#6
hey dude i m having one more problem when i am flashing the bios an error is coming saying "BIOS password is incorrect. Please retry!". I dont know what to do now???
find
quote
#7
hey guys!
i have a n IBM 8114 with 945G chipset. It only supports P4's and Pentium D's. So i Added microcodes for dual cores and core 2 duos using HeX Editor, successfully flashed bios but still the situation is same i.e it do not support dual cores and core 2 duos i have tested both. so what could be the problem????

one more thing to ask i used WinPhlash to flash my BIOS, is there something special setting in WinPhlash for new microcodes added BIOS??

help would be appreciated
find
quote
#8
(10-31-2014, 12:20 PM)Bazil Wrote: what could be the problem????
Make sure the CPUs are listed here:
http://ark.intel.com/products/27720/Inte...patibility
Also, it would help to upload the original and modified versions.

(10-31-2014, 12:20 PM)Bazil Wrote: one more thing to ask i used WinPhlash to flash my BIOS, is there something special setting in WinPhlash for new microcodes added BIOS??
I don't believe so.
find
quote
#9
yup i have checked it dude. One is Intel pentium Processor E2180 and the second one i tested is a core 2 duo E6400 both are compatible and listed on intel website. i m still stuck.
find
quote
#10
(11-01-2014, 11:59 AM)Bazil Wrote: yup i have checked it dude. One is Intel pentium Processor E2180 and the second one i tested is a core 2 duo E6400 both are compatible and listed on intel website. i m still stuck.

Have you tried a CMOS reset? If you upload the files before and after any mods, someone may be able to verify the work.
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in