No display after CPU change on Packard Bell Easynote TS11HR_517tk laptop

[EngereksizYilan]

My laptop is Packard Bell Easynote TS11HR_517tk. It had an i5 2450M processor and it wasn't enough for me. So I wanted to replace it and bought an i7 3610QE processor instead. I searched, the socket was also compatible and the chipset was also compatible. I installed the processor, all functions of the computer are working without any problems, the fan etc. is spinning, but there is no image on the screen. I think the problem is BIOS. What should I do? The latest BIOS version brought in 2012 .d.

[DeathBringer]

No way to add support for this CPU.

[EngereksizYilan]

Why don't? Chipset and socket are supporting. Are there any other things to look at?

[DeathBringer]

Intel only declares support of i7-3610QE for chipset HM65. But there is no motherboard with such support.

[EngereksizYilan]

My laptop is Packard Bell Easynote TS11HR_517tk. It had an i5 2450M processor and it wasn't enough for me. So I wanted to replace it and bought an i7 2670QM processor instead. I searched, the socket was also compatible and the chipset was also compatible. I installed the processor, all functions of the computer are working without any problems, the fan etc. is spinning, but there is no image on the screen. I think the problem is BIOS. What should I do? 

[DeathBringer]

Make a photo of laptop's motherboard near a socket.

[EngereksizYilan]

[DeathBringer]

The motherboard on photos has week power subsystem. It's not suitable for quad core CPUs.

[EngereksizYilan]

Is there anything to can I do

[DeathBringer]

Nothing