Packard Bell TM85 (Acer 5741G) - Intel i7 920XM & CMSO8GX3M1A1600C11 memory

[DeathBringer]

Is there a difference between laptop's working with native BIOS and my mod?
May be native BIOS works fine with i7-920XM and Kingston memory.
Please try flash native BIOS and post result. Especially I need a result of Coreinfo in this case.

[angelic0-]

65°C (150°F) is just after boot, after a bit of idle time it raises to 75°C (170°F), and will easily go over 90°C (195°F) with only little activites.

Hope it just needs some software tweaks...

[angelic0-]

Ok, tried the newest bios off Packard Bell's website..

Not sure if it is because it got to cool off between cycles, but it is idle now @ 65°C (150°F)...

Maybe i should get a new cooling paste, might solve the issue..

using outdated AS5

[DeathBringer]

What is version of "the newest bios off Packard Bell's website"? Can you give a link to it?
And I still need a result of Coreinfo with this "the newest bios".

[angelic0-]

Cleaned up CPU & GPU and applied CoolerMaster thermal compound, seems to run a lot cooler now.

I've included the downloaded file off Packard Bells website.

Everything seems to be in working order, i would however like a MENU in BIOS to be able to control fan speed and GPU memory.

Would be nice to be able to have 1-1,5GB of GPU memory, and also speed up the fan a bit sooner

Thanks again in advance, seems my old bios was way outdated.

p.s. these temperatures are right after the Resident Evil 5 Benchmark

[DeathBringer]

Look at your old screenshot of CPU-Z

You used the same BIOS - version 1.23
So problem was not in CPU and BIOS. I've delete my useless mod.
You can use "Unlocked" BIOS from camiloml. It's based on version 1.23 too.

[angelic0-]

I was using Camiloml Bios last time...

[angelic0-]

Can you make a unlocked menu with GPU settings, adjust memory and possibly a FAN control menu..

Thanks again...

[DeathBringer]

I don't make unlocking mods. You can create new topic in Insyde BIOS Unlocking Requests. It's offtopic here.