Packard Bell easynote ML65 t9400 cpu support

[quiquesk]

Hello

I have a Packard Bell easynote ML65 with a Phoenix BIOS  and i wanted to add Intel Core 2 Duo t9400 Cpu support.

I am a bit lost, I've tried to flash a bios that I have found in this web for Packard Bell easynote MH35 with WinPhlash but it did not allow me. It says something about "required device or platform not present or so". Anyway it has given me a backup of the current bios.
I've tried to edit this Bios but it says "Invalid ROM length" and I do not how to solve it. 

Thank you in advance.

[DeathBringer]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.

[quiquesk]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.

Hello 
Here I sent the two screenshots that you have asked me.

   

   

Thank you in advance.

[DeathBringer]

Chipset GL40 doesn't support FSB=1066Mhz. So you can't use T9400.
T8100, T8300, T9300 and T9500 are recommended for upgrade.

[quiquesk]

Chipset GL40 doesn't support FSB=1066Mhz. So you can't use T9400.
T8100, T8300, T9300 and T9500 are recommended for upgrade.

And with T7500 I have tried too, but did not work either.

Is it possible to add this cpu support?

[DeathBringer]

What was sSpec of your T7500?
Upload backup of BIOS.

[quiquesk]

They are a copy of my BIOS from Internet and an extraction of a previous release in exe.

I hope they are suitable.

Anyway if you tell me where I can find a tutorial that explains how to add cpu support I would be grateful.

[DeathBringer]

I'm not a tutor.
I still need the sSpec of your T7500.

[quiquesk]

I think it is SLAF8.

[DeathBringer]

All BIOS you attached has version P10.

Anyway it has given me a backup of the current bios.

I need your P11.