Phoenix Bios - EBRRSF09 - LG E310 Laptop

[qatarhoney]

Hello,
Need full Bios menu - particularly to be able to change sata settings (enable ahci), and disable Ide controller. Also would be nice to have SLIC 2.1..

Laptop: LG E310-M.CP6PE1
BIOS EBRRSF09
System Bios Version: LGE - 6040000 Ver 1.00PARTTBL
Board MCP 79 Elbrus-R

Bios rom file: http://www.lge.com/ae/support/product/support-product-profile.jsp?customerModelCode=E310-M.C2S2E&matchedModelCode=NOT_MATCHED&searchEngineModelCode=E310-M.C2S2E&initialTab=documents&targetPage=support-product-profile#

Alternative rom download: https://www.sugarsync.com/pf/D879206_150305_93959

Thanks in advance...

---

Particularly need to be able to do this:
Under the Advanced BIOS Features menu, set:
o HDD S.M.A.R.T. Capability [Enabled]
o CPU Enhanced Halt [Disabled]
o CPU Thermal Monitor [Disabled]
o CPU EIST Function [Disabled]
Under the Integrated Peripherals menu, set:
o USB Keyboard Function [Enabled]
o USB Mouse Function [Enabled]
o SATA RAID/AHCI Mode [AHCI]
o Onboard SATA/IDE Device [AHCI]
Under the Power Management Setup menu, set:
o HPET Mode [64-bit Mode]

Hello,
Need full Bios menu - particularly to be able to change sata settings (enable ahci), and disable Ide controller. Also would be nice to have SLIC 2.1..

Laptop: LG E310-M.CP6PE1
BIOS EBRRSF09
System Bios Version: LGE - 6040000 Ver 1.00PARTTBL
Board MCP 79 Elbrus-R

Bios rom file: http://www.lge.com/ae/support/product/support-product-profile.jsp?customerModelCode=E310-M.C2S2E&matchedModelCode=NOT_MATCHED&searchEngineModelCode=E310-M.C2S2E&initialTab=documents&targetPage=support-product-profile#

Alternative rom download: https://www.sugarsync.com/pf/D879206_150305_93959

Thanks in advance...

[1234s282]

Hi

We cannot unlock Phoenix bioses yet , although we are researching the possibility. I have modded your bios for LG SLIC 2.1 However this could be risky as i have modded all 4 bios files located in the official download.

Here you go , i used LG 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/LG%20E310...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[qatarhoney]

Hey Guys,
This slic worked a treat.
YAY
The downside is i made a few changes of my own in phoenix editor to try to enable ahci - DOH - bricked it on next flash...
No startup screen, no bios, flash drive wont boot. best i get is a few lights on battery and the cd rom having a quick flicker. paperweight laptop.
Ok the newb learnt his lesson... any help guys? I tried to make a boot cd with autoexec flash16 but didnt work either... anyone have any clues? an iso i can burn?
QH

Hi

We cannot unlock Phoenix bioses yet , although we are researching the possibility. I have modded your bios for LG SLIC 2.1 However this could be risky as i have modded all 4 bios files located in the official download.

Here you go , i used LG 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/LG%20E310...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[TheWiz]

Well, most laptops have soddered BIOS chips, but if yours is a PLCC or DIP8 chip, you can use our chip reprogramming service to fix your motherboard.

TheWiz