Hi, BDMaster
I have followed every step that you gave me. I made the USB DOS exactly like your tutorial in the rar file, then i copy the contents of the "modified" folder to the USB (i copy the contents without the folder). After that, i boot into legacy BIOS and disable Secure Boot.
This was the result:
Microsoft® Windows 98
©Copyright Microsoft Corp 1981-1999
C:\>flash.bat [i type flash.bat]
***************************************************
Ready to flash the BIOS
by sv17 -
http://forum.techinferno.com
Press enter to continue. [i press enter]
***************************************************
Flashing BIOS region
Intel ® Flash Programming Tool. Version: 8.1.10.1286
Copyright © 2007 - 2012. Intel Corporation. All rights reserved.
Platform: Intel® HM77 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid
--- Flash Devices Found ---
W25Q64DV ID:0xEF4017 Size: 8192KB (65536Kb)
Warning: Not all of the file data will be written to flash because the file is longer than the flash area to be written to!
File: "advslic.bin"
File Lenght: 3670016
Write Lenght: 3145728
Do you want to continue? Y/<N> or q to quit : Y [i type Y]
PRD Region does not exist.
GBE Region does not exist.
Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.
I failed to flash the BIOS. Please get back to me as soon as possible, thanks
PS. I'm not really understand what you mean by "Original (non modified) same version bios MUST be flashed already!" So, i have done nothing to the bios in the "original" folder.
Sorry, if i asked too many questions. I know nothing about BIOS before. Please help.