[REQUEST] Acer Predator Orion 3000 PO3-630 BIOS Unlock

[ShadWowZ]

It's possible to enable ram XMP2.0 overclocking but as the maximum bus speed of 3200 due to its mainboard.
(Credits to @genius239)
By using this grub tool. 
1. Format your usb flash drive to FAT32 and paste this EFI folder to your usb flash drive
2. Disable secure boot in bios
3. Insert your usb flash drive with grub installed
4. Press F12 during the boot and select your usb flash drive as bootable device
5. On grub screen type these two commands below
setup_var CpuSetup 0x19D 0x1
setup_var SaSetup 0x169 0x2
6. Then type
reboot
Done, now you have XMP2.0 overclocking enabled on your ram.
Warning: Do with caution because the maximum voltage of ram slots on this mainboard is 1.2V, enable xmp2.0 may cause your ram unstable because of insufficient voltage.
(now, I know why acer doesn't allow xmp2.0 allowed on this series 3000)

Hello and thank you for all these shares.

I have the P03-600 (the i5-8400 processor), would your procedure work?
I have a corsair dominator 3200mhz ram configured but it only runs at 2666mhz.
Won't the 1.2 V incident pose a problem? (If so, how can I go back)

Thanks in advance

[Lime_girl420]

hey by any chance would you be able to repost some of the bios mods I wanna try them on my own pc @genius239