[REQUEST] Asus ROG Strix G703VI BIOS Unlock

[neo26rus]

I just needed a tab advanced
Thank you

[Lost_N_BIOS]

Thank you! So, looks like the addition of another additional menu entry is causing the issue, let me look into this again and see if I can find a way to not make that happen. If I can't, then your only option will be either swapped advanced, and no chipset, or you pick some other menu to not have (like security maybe?) and I can replace that with chipset.

* Edit, so you don't need chipset, you only need the new advanced? If you only need new advanced, then let me know and I can wrap up a final BIOS for you, once you check new advanced you can see now and see vs AMIBCP do you see anything missing (missing submenus you want, or individual settings). If there is missing stuff you want, show me images of that section and I will unlock rest in a final BIOS edit.

[neo26rus]

everything is fine, all the tabs that I need you unlocked, thanks
do not help to insert the key windows 10

[Lost_N_BIOS]

So you want to use BIOS as-is, you don't need me to make a final, proper BIOS with swapped advanced as the actual goal? That's OK, just want to let you know there may be other changes in there that aren't ideal, as it was only meant as a test/debug BIOS (I assume you're using Boot3ADVSW correct?)

[neo26rus]

Yes that's right

[Lost_N_BIOS]

OK, sorry I couldn't get chipset for you too

[xim2]

Hi folks,

Will be very kind if someone can help me to unlock this bios (Asus G703VI - Chipset Intel CM238 Express - AMI Bios v310 - APTIO V)

Essentially interested to have a setting where i can disable RAID environment (AHCI only) and basic core voltage offset undervolting.

Thanx in advance.

PS : Ordered a SPI programmer wll receive it in a few days (CH341A 24 25 Series EEPROM Flash BIOS USB Programmer)

Winbond Serial NOR Flash - Product number : W25X05CLSNIG - Top side marking : 25X05CLNIG - Density : 512Kb - Vcc : 2.3V - 3.6V

Any info on the best software to use will be nice. Is dump bios with programmer and edit values with AMIBCP and flash with programmer is the way to go ?