[REQUEST] Bios Unlock Gigabyte AERO 15 OLED XD

[genius239]

@diggymow
Ok~it's great.

[devil1001]

Hi @genius239
I have the same Gigabyte Aero 15 Oled XD (I7 11800H, RTX 3070),
I wondered if I can use the same file that you uploaded to unlock my bios.
Edit: I forgot to include the dump file: https://drive.google.com/drive/folders/1...sp=sharing

[genius239]

@devil1001

I've sent you a mod in mail.

[devil1001]

hello @genius239
I've updated the bios file that you sent, but now I can't log into windows anymore, even though the keyboard is still on, the screen is black.
I only enable the CPU overlock feature and change the memory profile to XMP profile 01,
Please help me, do you know how to reset the change that I have made or if any fix is possible?
Oh, and I post this on my PC.

[genius239]

@devil1001

1. Wrong bios settings must reverted by clear cmos. You have to searching how to and do it yourself.

2. Laptop platform can't overclock processor , and if your memory module is not support xmp feature but you still choose xmp profile in bios ,got a blackscreen is very normal.

Now you have to do is clear cmos.

[devil1001]

Thank you for your answer, I will try to do your suggestions.
But right now, my laptop still has a warranty stamp that covers up the screwdriver hole so I can't open it up, if I do that my laptop will be void of warranty.
Do you know any method to clear Cmos without opening up my laptop? with a USB perhaps?

[genius239]

@devil1001

1. I've never heard that usb can do clear cmos.

2. If you're worry about lost the warranty ,why don't you use this warranty??

[devil1001]

Hello, a little update here:
I just received my laptop back from the warranty store yesterday, and it working again.
- They told me that the problem lies in the memory slot. They said that the memory slot got dirty and that is the reason why my windows cannot start up.
- The thing is I don't tell them that I had my laptop bios mod for fear they will deny warranting my laptop (their policy is don't warranty a laptop by consumer's mistake). So I have to lie that my laptop got an issue with memory.
- I don't know why they didn't tell me the real problem lies in the mainboard's bios, not the memory. But it doesn't matter anymore as long as I have my laptop working again.

So now, I want a little advice from you, should I continue using your modded bios again? Do you know which option to enable so that I can start using Throttlestop or XTU?
I really don't want to mess up again.
I can't use those programs because all the options to under volt are all greyed out.

[genius239]

@devil1001

1. If the service center haven't wrote bios chip but finally it was fixed ,so the real reason of can't start up normally is not related wrong bios settings ,maybe it's really caused by the memory slot.

2. Using or not of my mod is your choice ,but if you want to activate ThrottleStop ,you have to use it.

3. How to activate Throttlestop & XTU ? try the steps in below.
(1). Go into new advanced tab >> Power & Performance >> CPU - Power Management Control >> CPU Lock Configuration ,then disable "CFG Lock" & "Overclocking Lock".

(2). Go into new advanced tab >> OverClocking Performance Menu ,then enable "XTU Interface". (You have to enable "OverClocking Feature" at first then the OC menu will presensts fully.)

(3). If you only need to activate Throttlestop , only need to do step(1).

[giubenez]

OT: i have the same laptop, is it possible to limit the battery charge to, let say, 80%, so that it is preserved a bit?

thank you!