[REQUEST] HP DV6t-6c00 Whitelist removal

[Rabeek]

After booting from USB with your files, the flash drive diode blinks much longer, then, then a cursor appears on the screen for a moment, after a while the computer is restarted and then the black screen after starting.

[Maxinator500]

and then the black screen after starting

With the capslock that flashes twice?

[Rabeek]

Yes, capslock flashes twice.

[Maxinator500]

Yes

Try holding Win + V once again without any removables connected.

[Rabeek]

The case looks like this:
There is only an SSD drive in the laptop, there are no removable devices (only one usb stick).
1. After an unsuccessful flash, when trying to recover and downloading the BIOS from the HP website to my model and uploading the 017FC.bin file to the pen drive, starting the laptop without pressing the windows + v or windows + b keys or with these keys, the diode on the opendrive flashes for a while, LED on capslock stops and starts blinking twice, there is no restart of the laptop.

2. after uploading files from you to the pen drive, after starting the laptop without pressing the keys and with pressed Windows + v, Windows + b the same happens. The LED on the pendrive is flashing for a long time (about 20-30 seconds), the laptop is restarted and the caps lock LED starts flashing a time. If I leave the flash drive, it is read, then restart the laptop. And the same thing again.

I think the BIOS you sent is not for my model? I understand that the bin files downloaded from the HP website do not flash due to the lack of signatures (sig, rsa). I tried to replace the bin files downloaded from HP with the bin files sent by you, unfortunately then it happens as in point 1 (without rebooting). Files from HP and files from you vary length size. (4736896 / 4329472).
Is it possible to sign bin files downloaded from HP website?
Previously I had the F.1C version, now I can't find it on the HP website, it's only F.1B
https://support.hp.com/pl-pl/drivers/sel...ku=A1U54AV

[Maxinator500]

I think the BIOS you sent is not for my model?

It is for your notebook model.

I understand that the bin files downloaded from the HP website do not flash due to the lack of signatures (sig, rsa).

That's not so. HP BIOS files are always signed, but to work with HP UEFI Support Environment they should be decrypted. Maybe this particular version of support environment is not compatible with your device? Try re-creating a recovery flash drive with one of those:
HP UEFI Support Environment to create HP_TOOLS
sp63065 : 5.3.1.0 -- http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63065.exe
sp61632 : 5.2.0.0 -- http://ftp.hp.com/pub/softpaq/sp61501-62000/sp61632.exe

Or maybe changing the pen drive label also makes sense.

Previously I had the F.1C version, now I can't find it on the HP website, it's only F.1B

http://ftp.hp.com/pub/softpaq/sp60501-61000/sp60655.exe

[Rabeek]

Thank you. Using sp63065.exe helped. Everything went smoothly, the laptop is working. I am impressed with your knowledge and willingness to help.
I was so successful that I wanted to flash sp55375_NWL_v2_ByCamiloml.exe. Unfortunately, I get the information that the BIOS is older than the current one and the process is interrupted. Is there an easy way around this?

[Maxinator500]

Is there an easy way around this?

Try opening "platform.ini" in notepad and editing the folowing:
[Bios_Version_Check]
Flag=0

[Rabeek]

Unfortunately the BIOSes
sp55375_NWL_ByCamiloml.exes
sp55375_NWL_v2_ByCamiloml.exe
cause the laptop to fail to start.
sp55430_NWL_ByCamiloml.exe is corrupted.
Should I stop thinking about replacing the WiFI card?

[Maxinator500]

Unfortunately the BIOSes cause the laptop to fail to start.

Ok. These mods are the failures.

Should I stop thinking about replacing the WiFI card?

Try taping pins.