[REQUEST] HP Pavilion g6-1300 (AMD) BIOS Unlock

[BDMaster]

Here You go :

http://rghost.net/8QHtNg8cy

Let me know
Regards

Donate to me . . . look into my Signature

[BDMaster]

I will give a look !
Regards

[ED.RU]

No error, but the update says: "Failed to update."

[ED.RU]

Here You go :

http://rghost.net/8QHtNg8cy

Let me know
Regards

Donate to me . . . look into my Signature

I am grateful, but the BIOS does from my laptop "brick"!

[ED.RU]

You are no longer able to help me?

[moman2000]

Here You go :

http://rghost.net/8QHtNg8cy

Let me know
Regards

Donate to me . . . look into my Signature

Hi can u help me my skype is mo.mohamed2000 please contact me here if not reply here thanks

[MRI48]

Someone that can help?

[bhuthogg]

hiya, i've just went onto this laptops bios and it can only change very basic stuff, is there a "better" bios available?
heres the info i have

hp paillion g6 1337-sa
https://ftp.hp.com/pub/softpaq/sp62001-6...p62234.exe
insydeflash
F.6A

id like to be able to pop older os (xp or 2000) onto it but i cant find the sata-ide options my desktop has? and i just get a blue screen trying to install 

Cheers

[Lost_N_BIOS]

This BIOS contains three system images with different ID's, can you see your "System ID" from flashing with the exe, or in any of it's logs?

BIOS contains images for these three main systems
165C, 165E, 3564

But flash ini control file (Platform.ini) has to following, so any of the following will use one of the three above (I need to know which to edit for you)
[Platform_Check]
Flag=2
PlatformName1=165C
PlatformName2=165D
PlatformName3=1660
PlatformName4=1661
PlatformName5=1664
PlatformName6=1665
PlatformName7=165E
PlatformName8=165F
PlatformName9=1662
PlatformName10=1663
PlatformName11=3562
PlatformName12=3563
PlatformName13=3564
PlatformName14=3565
PlatformName15=3566
PlatformName16=3567
PlatformName17=3568
PlatformName18=3569
PlatformName19=
PlatformName20=
;This flag is the switch of comparing bios project ID with ROM file project ID.
;Flag default : 3.
; 0 : Don't check project ID.
; 1 : Check project ID of new file.
; If ID is different with current BIOS, the utility will close.
; 2 : Utility will compare current platform ID with the 20 platform IDs.
; If any one is match, it will go ahead, otherwise utility will close.
; 3 : Depends on BIOS report.
;PlatformName1~20 default : empty.
; String : If ROM file do not contain correct ID, user can define ID here.


I also see a lot of BIOS settings, and default user view is full, so assumed you would see a lot too. How limited are we talking here, what are you missing that you want? I do see SATA - IDE/AHCI settings in all three BIOS images, inside IDE configuration page, you can set IDE, AHCI or IDE->AHCI (Default), then legacy or UEFI mode, then force RAID Mode

For XP and AHCI you would probably need to load "F6' AHCI drivers during the install setup.

[bhuthogg]

mines is really tied down to the point of i can test hard drive set bios password and choose boot order and thats really about it.