Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[REQUEST] Lenovo G50-30 (A7CNxxWW) Whitelist Removal
#11
Here You go (CH341A Programs) :

http://rghost.net/6rrRPtchr

Let me know
Regards

P.S. You have to dismantle the laptop and get the MoBo nacked
then Find the Eeprom Chip near the chipset ENE and read the Firmware
Upload It and I will modify !

    --- Flash Devices Found ---
    GD25LQ64    ID:0xC86017    Size: 8192KB (65536Kb)

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#12
something 's weird ... I opened the laptop , I came to the motherboard, but can not find any BIOS chip (I mean the number written on it and the producer ) . I tried the program search function, with all the chips on the motherboard that shows that the BIOS, but nothing ...
The program recognizes no chip as the BIOS. Is that possible? Or am I wrong ...
find
quote
#13
You have to allign all to Pin #1 from Eeprom Chip to SPI PGM !
Look here :

https://www.bios-mods.com/forum/Thread-R...val?page=3

Let me know
Regards

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#14
I tried again and again , and the only one I could read was this .... is it good?

http://rghost.net/7mCtbSJlx
find
quote
#15
It's strange as there is good file part but is missing all rest !
So You are reading well but only 512 kb and It has to be 8192 KB !!!

--- Flash Devices Found ---
GD25LQ64 ID:0xC86017 Size: 8192KB (65536Kb)

I repeat data into this file are correct only They are Descriptor and ME Regions !
So is missing the Bios Region !!!
You have to set this Eeprom Chip into setting GD25LQ64 or some like this 25LQ64
Let me know
Reagrds

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#16
hello,
few reads

http://rghost.net/7MhJjYmsB
http://rghost.net/7z8sVxg4d
http://rghost.net/8mYV8cW8j
http://rghost.net/7TXQRk2V8
find
quote
#17
Here You go :

http://rghost.net/7Cq2WrnHp

let me know
Regards

Donate to me for my work and time . . . look into my Signature Wink

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#18
Sad( the laptop don't start, only the led are on for 30 sec....

steps:
1. i erase the eprom chip( because if i wan't to "auto", the program sent me an error)
2. and i programm the chip with your custom bin (no errors)

question: in the program, i can't find the gd25lq64, i read and i write with gd25q64, it's ok?
find
quote
#19
Yes it's same !
After programmed It You make a compare to test ?

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#20
if i put your custom bios the message is : chip and buffer are the same.... but the laptop don't start, only the leds are on for the aprox 30 sec....

if i put the old bios the message is: chip with the contents are in disagreement. the laptop don't start and the leds are on for the aprox 2 sec....

Sad(
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in