[REQUEST] Lenovo G50-70 (9ACNxxWW) Whitelist Removal

[benji79]

It works but EC revision is still 29. Is it ok?

[BDMaster]

Yes It's explained all around into our forum as We use a Bios Unlocked
as launch pad to flash all Locked one and We get an EC Disalignement
but It doesn't matter fo Bios purposes !
Regards

[miki81zzz]

Hi Bd-Master, good evening. I have a problem. I have success flash your bios with whitelist removed. I have touched video setting and my laptot it's bricked thereis a solution for the problem? Thank's. I have leaved cmos battery, ram, hdd but no success. Screen black and numlock led flashing. LENOVO G50-70 laptop. thank's

[BDMaster]

Try this trick . . .


Littleman

The latest Discovery about Recover Bios after a Black Screen for Video Card :

The simplest solution worked!
For future reference, the trick was to find the right combo of keys:

F2 to boot into BIOS then F9 - ENTER - F10 - ENTER

1. F2 go to Bios
2. F9 follwed by + Enter Key
3. F10 follwed by + Enter Key

let me know
Regards

[miki81zzz]

Try this trick . . .


Littleman

The latest Discovery about Recover Bios after a Black Screen for Video Card :

The simplest solution worked!
For future reference, the trick was to find the right combo of keys:

F2 to boot into BIOS then F9 - ENTER - F10 - ENTER

1. F2 go to Bios
2. F9 follwed by + Enter Key
3. F10 follwed by + Enter Key

let me know
Regards

My laptop have a button for start directly in the bios but the notebook start but don't go on bios, only black screen.

Oh yes!!!! Thank's Bd-Master. I solved the problem with your tricks. Thank you very much. The sample solution it's the good solution. 

I disassembled the laptop piece by piece and unsoldered cmos battery but it's on the BIOS EPROM and do not reset .

[madman1]

Today arrived my new wifi card. First of all I remove the old one and put the new one. Boot and a message invites me to remove the card as expected. swap the old one and then I made the USB MSDOS with rufus and enter the modded bios you sent me time along. Try to flash but error 28 appears. Press enter and try again, error 28 again and it ends. My BIOS seems to be write protected. Bad luck
So what should I to do next? shoot my head? :'-(

[BDMaster]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

[madman1]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

Hi, my results are in the page 3 of this thread. They are the same I attach here but now I include the bios file inside too
http://rghost.net/private/7qxNmqmVx/6a0a...11589d934c

[BDMaster]

Here You go :

http://rghost.net/8h6yCXByc

let me know
Regards

Donate to me for my work and time . . . look into my Signature

[madman1]

Here You go :

http://rghost.net/8h6yCXByc

let me know
Regards

Donate to me for my work and time . . . look into my Signature

the same error