[REQUEST] Lenovo G510 (79CNxxWW) Whitelist Removal

[n3c]

Bump.

(sorry but I need some help)

[Da Vinci Code]

hello!
Try to flash the earliest version and then flash mod with sleep bug and command line.
Regards.

[n3c]

Thank you very much for your help.

I flashed back bios version 3.05 and did a first test with:

Code:

fptw.exe -d 305_BACKUP_UNTOUCHED.BIN -BIOS

And tried to flash this back with:

Code:

fptw.exe -f 305_BACKUP_UNTOUCHED.BIN -BIOS

 
That worked without any problems output:

Code:

C:\fptw>fptw.exe -f 305_BACKUP_UNTOUCHED.BIN -BIOS

Intel (R) Flash Programming Tool. Version:  9.5.14.1724
Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel(R) HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

   --- Flash Devices Found ---
   W25Q64BV    ID:0xEF4017    Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 6656KB of 6656KB - 100% complete.
- Verifying Flash [0x800000] 6656KB of 6656KB - 100% complete.
RESULT: The data is identical.

FPT Operation Passed

After that I tried to flash my modified 3.09 version and got the following error:

Code:

C:\fptw>fptw.exe -f fptw_bios_modified.bin -BIOS

Intel (R) Flash Programming Tool. Version:  9.5.14.1724
Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel(R) HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

   --- Flash Devices Found ---
   W25Q64BV    ID:0xEF4017    Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 6656KB of 6656KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Failed to erase this block 3 times!!

Any ideas?

[voximdo]

Could you reupload this file? Or can someone remove whitelist for that link in first post again?

[Da Vinci Code]

Replied in PM!
Regards.

[voximdo]

Thank you so much! But unfortunately I get error:
"Error 201: [FPTW.exe] cannot be run on the current platform. Please contat your vendor"
I get it while using 32 bit and 64 bit. What can be the problem?

[noobleslol]

Hello [Image: shy.gif] I came here to ask for your help again. This time for Lenovo G510. I bought new wlan card to it and now I need to remove whitelist Smile

Laptop model: G510

Type: Insyde BIOS /ACPI 2.0
Vendor: LENOVO
Version: 79CN50WW(V3.09)
Bios dumped by: Universal BIOS Backup ToolKit 2.0:
https://cloud.mail.ru/public/7eDy/Xb4xBpy4m

[t8r5s]

Hi guys,

Wondering if someone can help me with the following:

Bought a 7260 wireless card and stuck it in the laptop, but it will not boot with the whitelist in place. Is it possible to mod this BIOS? Or is it write protected?

I have uploaded a fresh bios backup here: http://rghost.net/7C5kMlkRZ

LENOVO-79CN47WW(V3.06).rom

Regards, Tom

[G510Terminator]

Only SPI Programmer

Let me know
Regards

Thats the Problem, i have 2 SPI PRogrammer and both do not work with this kind of chip 

So i wait for a other solution (or a new Notebook)

Any news? or i will terminate the laptop with a bulldozer...

[Da Vinci Code]

Hello, potential hero of terminator 6!
Try downgrade to one of oldest bios version and use Sleep Bug.
Set your laptop to suspended mode and wake up it after few seconds.
Then run tool and look at results.png ,check it for error 280 red text.