[REQUEST] Lenovo Thinkpad X230(i) (G2ETxxWW) Whitelist Removal

[Dudu2002]

Hello I have a X230 I want to unlock the whitelist so I can replace the wifi card. I tried to follow your download link but it says it's "Access to the file is restricted" can you please re upload the file? thanks!!

Hi
All mods is personal!
use SPI-programmer + clip, make bios damp and report

[spacecowboy]

Thanks for the heads up. I'll post back when my clip arrives from the mail.

[spacecowboy]

Hello! Can someone help me unlock my bios for battery, different wifi advanced menu etc? thanks!

[Dudu2002]

Hello! Can someone help me unlock my bios for battery, different wifi advanced menu etc? thanks!

Hi
Your mod completed, read PM

[Pwnd0you]

I've got roughly the same problems. Need battery unlock and I'd like to enable the use of other hardware as well. I've already got access to the chip and have made dumps, as well as tested Coreboot, but haven't been able to find a way to update the battery controller with Coreboot to unlock it. Can anyone help me out?

[Diadon81]

These are the causes about bad working SPI PGM :

insufficient power supply (I tried to give external Power and this is relative)
bad contacts (more probably and sure like Soic Clip are very bad)
too long wires (sure)
bad pinout (not probably)

So the best way to make a good use is to get :

http://www.digikey.co.uk/product-detail/...-ND/528233

and the soic8 ocket :

http://siliconkit.com/ocart/index.php?ro...ct/product&product_id=169

Then all is over

To get the Bios Mod You have to read your Full Dump Firmware and upload It here,
then I will modify for You !
Let me know
Regards

Dear BDMaster

I have Lenovo X230 and want to remove a whitelist from it.

Now, I have:
TL866CS
Clip
MX25L3206E - spare chip

I follow the tutorial:
https://www.bios-mods.com/forum/Thread-T...ware-Flash

but I don't have enough expirience with soldering, I decied to use clip. Before I start, I checked programmer and clip with spare MX25L3206E and flash it successefully.

Unfortunatelly, when I use my clip with chip on the motherboard, I get a short circuit or missed pin message.
I tried several times, but with no luck.

I have read you message, to use:
http://www.digikey.co.uk/product-detail/...-ND/528233
http://siliconkit.com/ocart/index.php?ro...ct/product&product_id=169

do I need it both? 

According to my understanding, first one is enough in my enviroment or I missed something?


Thank you for your support.

[overclocked92]

I've read the roms with Raspberry Pi and clip and have attached them. I would like whitelist removal and the advanced menu unlocked.

I've also read about a fix for the ROMS to allow 16GB of memory + external graphics acclerator. Is this possible also? if not the whitelist and advanced menu would be great.

Thanks

[Dudu2002]

I've read the roms with Raspberry Pi and clip and have attached them. I would like whitelist removal and the advanced menu unlocked.

I've also read about a fix for the ROMS to allow 16GB of memory + external graphics acclerator. Is this possible also? if not the whitelist and advanced menu would be great.

Thanks

Hi
Your mod completed, read PM

[DigitalPackrat]

Can someone set me up with whitelist removal and advanced menu please. Both chips are in the zip below.

[TheChuckster]

Can anyone do mine? Going to take a stab myself, but this is my first time, so help is appreciated to compare results!

I already modified the 8 MB dump by running the Intel Management Engine neutralizer script on it, and that works fine.

Happy to PayPal or Bitcoin something over in appreciation!