[REQUEST] Lenovo Thinkpad X230(i) (G2ETxxWW) Whitelist Removal

[BDMaster]

Added foto.

Can You make a Bios Backup and upload result here, I want to check if Bios
is the same or Win8 has modded Efi modules.
Use this tool :

http://rghost.net/52417082

regards

[harpii]

Can You make a Bios Backup and upload result here, I want to check if Bios
is the same or Win8 has modded Efi modules.
Use this tool :

http://rghost.net/52417082

regards

Of course

http://www.sendspace.com/file/hplt9j

[BDMaster]

Can You make a Bios Backup and upload result here, I want to check if Bios
is the same or Win8 has modded Efi modules.
Use this tool :

http://rghost.net/52417082

regards

Of course

http://www.sendspace.com/file/hplt9j

Ok friend,
try this one, I eliminate Infinite Loop so have to work :

http://www.sendspace.com/file/jhgoc8

let me know
regards

[harpii]

Ok friend,
try this one, I eliminate Infinite Loop so have to work :

http://www.sendspace.com/file/jhgoc8

let me know
regards

Thanks a lot.

[fraisdos]

I have tested the method without success.
I have replaced the hex chain by the one of my new card, and it seems that there is no modification after installing the mod bios.
I can't use the new card but I can use the original one ?!

Any idea where the process get stucked ?

FYI: I use g2uj18us and g2uj17us bios versions to upgrade and downgrade.

[BDMaster]

I have tested the method without success.
I have replaced the hex chain by the one of my new card, and it seems that there is no modification after installing the mod bios.
I can't use the new card but I can use the original one ?!

Any idea where the process get stucked ?

FYI: I use g2uj18us and g2uj17us bios versions to upgrade and downgrade.

This Method not resolve problem definitively as It bases on Chngeing PCI / VEN
Definition for Whitelist WWan Card, so doing in this way You are saying to Bios
that card is good don't worry ! (It's first No Whitelist Method created by Yen MDL).
Regards

[fraisdos]

I have tested the method without success.
I have replaced the hex chain by the one of my new card, and it seems that there is no modification after installing the mod bios.
I can't use the new card but I can use the original one ?!

Any idea where the process get stucked ?

FYI: I use g2uj18us and g2uj17us bios versions to upgrade and downgrade.

This Method not resolve problem definitively as It bases on Chngeing PCI / VEN
Definition for Whitelist WWan Card, so doing in this way You are saying to Bios
that card is good don't worry ! (It's first No Whitelist Method created by Yen MDL).
Regards

Thank you for the reply.

After investigation, the PCI / VEN chain is defined in both files : $01D3000_SLIC.FL2 & $01D3000_SLIC.FL1.

It seems that replacing the hex chain in only ***.FL2 is not sufficient.
But doing it in both files leads to a security checked failed when installing the mod. bios .
Any idea ?

[BDMaster]

I have tested the method without success.
I have replaced the hex chain by the one of my new card, and it seems that there is no modification after installing the mod bios.
I can't use the new card but I can use the original one ?!

Any idea where the process get stucked ?

FYI: I use g2uj18us and g2uj17us bios versions to upgrade and downgrade.

This Method not resolve problem definitively as It bases on Chngeing PCI / VEN
Definition for Whitelist WWan Card, so doing in this way You are saying to Bios
that card is good don't worry ! (It's first No Whitelist Method created by Yen MDL).
Regards

Thank you for the reply.

After investigation, the PCI / VEN chain is defined in both files : $01D3000_SLIC.FL2 & $01D3000_SLIC.FL1.

It seems that replacing the hex chain in only ***.FL2 is not sufficient.
But doing it in both files leads to a security checked failed when installing the mod. bios .
Any idea ?

Ok friend,
.FL1 = Bios File, .FL2 = EC File, so the file to use is .FL1 !!!
Bios Mod File cannot reflash normaly into Eeprom (may be is Capsulated or Signed)
look this guide of mine :

http://rghost.net/56900178

Then We are using the only mathos exsisting Intel FPT !
There are 2ways to reflash Bios Mod on Eeprom :

1. Recovery Mode
2. Intel FPT

so using this tool You will ge a result file and can see error type You got rewriting Bios into Eeprom :

http://rghost.net/52417082

Nad then if error 280 Its not possible to bypass so SPI PGM is solution, otherwise You can use FPT and Marco util Prr.exe !
Regards

[fraisdos]

The results are:

architecture = x64_

Intel ® Flash Programming Tool. Version: 8.1.10.1286
Copyright © 2007 - 2012, Intel Corporation. All rights reserved.

Platform: Intel® QM77 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
MX25L6405D ID:0xC22017 Size: 8192KB (65536Kb)
MX25L3205D ID:0xC22016 Size: 4096KB (32768Kb)

--- Flash Image Information --
Signature: VALID
Number of Flash Components: 2
Component 1 - 8192KB (65536Kb)
Component 2 - 4096KB (32768Kb)
Regions:
Descriptor - Base: 0x000000, Limit: 0x000FFF
BIOS - Base: 0x500000, Limit: 0xBFFFFF
ME - Base: 0x003000, Limit: 0x4FFFFF
GbE - Base: 0x001000, Limit: 0x002FFF
PDR - Not present
Master Region Access:
CPU/BIOS - ID: 0x0000, Read: 0x0B, Write: 0x0A
ME - ID: 0x0000, Read: 0x0D, Write: 0x0C
GbE - ID: 0x0118, Read: 0x08, Write: 0x08

Total Accessable SPI Memory: 12288KB, Total Installed SPI Memory : 12288KB

FPT Operation Passed

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.


Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.

Intel ® Flash Programming Tool. Version: 1.0.2.1065
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.


Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.




&:

Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.



What can I do with these results ?

[BDMaster]

on error 28 is possible use Svl7 tool prr.exe and see if byass the lock !
Use this tool from USB Dos Bootable, copy all files form It to USB root then copy the Bios Mod
too and rename as bio.bin and run flash.bat !

http://rghost.net/56772071

Regards