Login

Simonettore · (This post was last modified: 12-17-2015, 12:43 PM by Simonettore.)

(12-17-2015, 12:10 PM)BDMaster Wrote: Hi mate,
on your actual version 1.16 You can flash the Bios Mod using the Sleep Bug
menwhile on version 1.17 not !
So doesn't update the bios and use this one !
Here You go :

http://rghost.net/6jqWDRZ47

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

Hi BDMaster,
thank you very much!
I will proceed to try to flash it as soon as I come back home from work!
I will let you updated! Big Grin

P.S. After I have flashed the modified bios I can't update it nevermore if I don't want to lose my chance to let wlan is working, right?

**BDMaster** · 12-17-2015, 02:28 PM

Yes exactely !
Regards

Simonettore · 12-17-2015, 02:36 PM

(12-17-2015, 12:10 PM)BDMaster Wrote: Hi mate,
on your actual version 1.16 You can flash the Bios Mod using the Sleep Bug
menwhile on version 1.17 not !
So doesn't update the bios and use this one !
Here You go :

http://rghost.net/6jqWDRZ47

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

I've downloaded it and I'm ready to flash as your instructions!
I'm waiting for your reply about my last question...can I update the bios in the future after I have done this flash?

P.S. I sent you a donation for your great job!!! Wink

P.S.2. Ma che sei italiano??

Simonettore · (This post was last modified: 12-17-2015, 02:49 PM by Simonettore.)

(12-17-2015, 02:28 PM)BDMaster Wrote: Yes exactely !
Regards

Well, I tried to do as you wrote to me but I got error messages.

Below, what I got...

Intel ® Flash Programming Tool. Version: 9.5.14.1724

Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
EN25QH64 ID:0x1C7017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 6144KB of 6144KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Failed to erase this block 3 times!!

C:\Modified>

What that means? Thanks! Sad

I'm on Windows 10!

**BDMaster** · (This post was last modified: 12-17-2015, 02:53 PM by BDMaster.)

Hi mate,
I will reply in PM !
Regards

P.S. si lo sono !

**BDMaster** · 12-17-2015, 03:06 PM

Make the Downgrade to version 29 and redo results files :

http://rghost.net/8bvTtTKys

let me know
Regards

Simonettore · 12-17-2015, 06:16 PM

(12-17-2015, 03:06 PM)BDMaster Wrote: Make the Downgrade to version 29 and redo results files :

http://rghost.net/8bvTtTKys

let me know
Regards

Hi BDMaster and thanks for your help.

So this is what I get when Itry to downgrade my bios....then if I click OK the flash software closes itself! Sad

How can I solve the problem?

Simonettore · (This post was last modified: 12-17-2015, 07:40 PM by Simonettore.)

It's okay. I succeeded! I just modified the FLAG inside the platform.ini files...you know that! Wink

Now I have 1.15 bios vrs! Thank you! Big Grin

Anyway, can I now try to flash the modified 1.16 vrs that you have sent to me already? Or I necessarily have to flash a 1.15 modified at this time?

Thanks for everything,
Simone

EDIT: Anyway, these are the files for any modification you want to doing:
1.15 backup
Results

Regards

**BDMaster** · 12-18-2015, 04:21 AM

The Version 1.16 shows Error 280 into result file and You can see by yourself
just unpack It using WinRar v.5.20 or above !
You can try It Wink

I will prepare a new Bios Mod quickly !
Regards

**BDMaster** · 12-19-2015, 03:20 AM

Hi mate,
on your actual version 1.15 You can flash the Bios Mod using the Sleep Bug

Here You go :

http://rghost.net/6bhRQg6Zq

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

Login
Username:
Password:	Lost Password?
	Remember me