[REQUEST] Lenovo Z50-70 & Z40-70 (9BCNxxWW) Whitelist Removal

[Ronn]

when the update is written here

[Da Vinci Code]

This is not working under Windows!
Update from pure DOS with USB-bootable stick
See how to make one here:
http://www.howtogeek.com/136987/how-to-c...usb-drive/

Copy the "Modified" folder contents into the stick and boot in DOS mode and
Run Flash.bat to update.

[Ronn]

[Da Vinci Code]

Press Enter to continue

[Ronn]

Press Enter to continue

I pressed. Again, this is a mistake. and then everything.

[Da Vinci Code]

Ok.Load to Win.Set your laptop to suspended mode and wake up it after few seconds.
Then run CLI and try again as you do it at first screenshot.

[Ronn]

when I come home at once I try.

[Ronn]

Nothing has changed. Just as in the first picture.

[Da Vinci Code]

It seems you didnt used sleep bug!!Just close and reopen Lid then run CLI again!

[Ronn]

I looked setting when closing the laptop.
Configured to sleep.
I close the laptop, wait 5-10 seconds.
I open the cover.

I run CMD as Administrator. I inscribe
cd \

cd modified

fptw -f bios.bin -bios

I achieve results

Microsoft Windows [Version 10.0.10586]
© Корпорация Майкрософт (Microsoft Corporation), 2015. Все права защищены.

C:\WINDOWS\system32>cd\

C:\>cd Modified

C:\Modified>fptw64 -f bios.bin -bios

Intel ® Flash Programming Tool. Version:  9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

    --- Flash Devices Found ---
    EN25QH64    ID:0x1C7017    Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Failed to erase this block 3 times!!

C:\Modified>