[REQUEST] Samsung NP900X4D AES-NI enablement

[cashchow]

Next step:
fptw64 -bios -f bios.rom
Make a screenshot of the result.

Probably not what you wanted to see. Resulting flash failed due to Protected Range Registers. See attached image.

[DeathBringer]

Disable Secure Boot in BIOS.
Boot to Windows, close your laptop and wait for sleep mode.
Then wake up your laptop and try again
fptw64 -bios -f bios.rom

[cashchow]

   

different error now:
Error 103: There are no supported SPI flash devices installed. Please check connectivity and orientation of SPI flash device.

[DeathBringer]

Hmm...
Try backup again right now
fptw64 -bios -d new.rom

[cashchow]

Hmm...
Try backup again right now
fptw64 -bios -d new.rom

uh oh. exact same error as the flash command above "error 103"

When I disabled secure boot in my BIOS I was given 3 choices that opened up. I picked what came up automatically UEFI boot.

[DeathBringer]

Try to find suitable options in BIOS for backup.
Then make "sleep trick" to flash.

[cashchow]

Try to find suitable options in BIOS for backup.
Then make "sleep trick" to flash.

Not sure I understand the "suitable options" part. 
Here's a link to a screenshot of the BIOS options that opened up when I disabled secure boot:
https://1drv.ms/i/s!ArX7-6HxdVrnrgrTuJxLufP9FMp1

The options are UEFI OS, CSM OS, and "UEFI and CSM OS"

[cashchow]

   
I tried CSM OS, and my system wouldn't boot. I'm assuming Windows needs to have it's bootloader configured for that or something

I tried UEFI and CSM OS and my system did boot and I was able to redump. Trying to flash the new dump failed the same way the original did with the register error.

UPDATE: I put my system to sleep after trying the flash above. On wake up I tried flashing again and now I got the error 103 SPI error like I did before.

[DeathBringer]

I put my system to sleep after trying the flash above. On wake up I tried flashing again and now I got the error 103 SPI error like I did before.

Afler error 103 do
fptw64 -i
and make a screenshot of the result.

[cashchow]

I put my system to sleep after trying the flash above. On wake up I tried flashing again and now I got the error 103 SPI error like I did before.

Afler error 103 do
fptw64 -i
and make a screenshot of the result.

After error 103 running fptw64 -i results in another same error 103.

EDIT: i tried rebooting and it worked this time see attached