[REQUEST] Samsung NP900X4D AES-NI enablement

[cashchow]

Ran the grub command. see attached one drive link:
https://1drv.ms/i/s!ArX7-6HxdVrnrhjQQGvub4GPn3Tu

[DeathBringer]

Run command: setup_var 0xC4 0x0
Reboot and do "prr2 trick" again.

[cashchow]

Run command: setup_var 0xC4 0x0
Reboot and do "prr2 trick" again.

Is it ok to enter windows again after setting that var? Or should I make 2 boot drives

[DeathBringer]

It's OK.

[cashchow]

same problem with the previous prr2.exe run... it said "Flash protection could not be removed."

bios was able to be dumped, and again couldn't be flashed.

I ran the grub boot again to double check and the 0xc4 offset was still 0

[DeathBringer]

So I have no more ideas.

[cashchow]

So I have no more ideas.

That makes me sad

Thanks for the help though.

[cashchow]

I decided to open the P11APK.cap file of my bios in 7zip and unpack it.

It had an Insyde folder. Would the Insyde subforum be able to help?

[DeathBringer]

P11APK.cap is capsule for Phoenix SCT BIOS.

[cashchow]

Phoenix UEFI WinFlash now says:

Warning: Security mechanism not supported. Please get correct capsule.