[REQUEST] Sony Vaio VPCEH & VPCEJ series (R0xx0Z9) BIOS Unlock

[adawy]

run tools https://www.sendspace.com/file/vftkc3 , make bios damp and report

Thank you. Here's the ROM

[adawy]

It's an insydeh2O for Sony VAIO VPCEH36EA. Here's a screenshot of it in the advanced menu: http://i.imgur.com/6tVWjYu.jpg
And here are the BIOS files: https://www.sendspace.com/file/nmwi27
It's modded by Dudu2002

[Dudu2002]

It's an insydeh2O for Sony VAIO VPCEH36EA. Here's a screenshot of it in the advanced menu: http://i.imgur.com/6tVWjYu.jpg

This mod for this notebook ONLY !!!

[adawy]

It's an insydeh2O for Sony VAIO VPCEH36EA. Here's a screenshot of it in the advanced menu: http://i.imgur.com/6tVWjYu.jpg

This mod for this notebook ONLY !!!

I didn't use it for another computer or anything. The problem is that I still can't find hyperthreading control.

[mclarke2355]

I can see it in the EFI-table: Power-tab --> Advanced CPU control --> HT Support
Is that setting not visible for you in the BIOS?

[adawy]

I can see it in the EFI-table: Power-tab --> Advanced CPU control --> HT Support
Is that setting not visible for you in the BIOS?

No, it's not visible. Here's what I see when I enter ">EFI" from the Boot tab: http://i.imgur.com/6aXCYAF.jpg

[mclarke2355]

Ok, do you have the Power-tab?
If you do, is the Advanced CPU Control option there?

[adawy]

Ok, do you have the Power-tab?
If you do, is the Advanced CPU Control option there?

No, I don't have a power-tab.

[mclarke2355]

In don't know how to unlock tabs for this model, but Dudu2002 might be able to do it.
You might also be able to change the setting this way (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700

Here's the according setting:
0xE164 Setting: HT Support, Variable: 0x1BC[1] {05 09 BC 01 01 52 02 53 02}
0xE16D Option: Auto, Value: 0x1 {09 09 09 00 01 00 05 F9 0C}
0xE176 Option: Disabled, Value: 0x0 {09 09 07 00 00 00 04 F9 0C}

And here's the EFI-table: https://drive.google.com/file/d/0B4NHIBM...xlc3c/view

[adawy]

But where should I write the command "H2OUVE.exe -gv vars.txt"?
Could you explain more briefly please?