[REQUEST] Zen 2 support for Dell 27 7775

[hazrdss]

Currently comes in Ryzen 5 1400 and Ryzen 7 1700 variants. Needs microcode added to support (I hope) a Ryzen 2700 (zen 2)

BIOS Link: https://www.dell.com/support/home/en-au/...erid=4938w

[hazrdss]

aida64

[hazrdss]

Current microcode in the isFlash.bin bios file is as follows

[Maxinator500]

Hi!
You can change the microcode, but how are you going to flash the bios? Insyde flash tool would probably update your bios, otherwise you need to use a programmer.

DOWNLOAD

[hazrdss]

Thanks!

[hazrdss]

It seems whenever I load the Insyde H2OFFT software, as soon as it hits the "Erase/Writing" Windows 10 will reboot, and I have to recover the BIOS.
Do you know if there are any update H2OFFT software versions floating around?

Cheers!

[Maxinator500]

It seems whenever I load the Insyde H2OFFT software, as soon as it hits the "Erase/Writing" Windows 10 will reboot, and I have to recover the BIOS.

I see your point, but I'm not sure if the problem depends on the FFT version (PM me if you'd want to get some SW to test). The program should reboot the system only if flashing is complete. There must be some kind of protection interrupting this process and breaking first blocks of SPI memory. Or use one which is originally packed in update from support an hasn't been changed by me.

[hazrdss]

Ive tried the different versions, even found 5.74 and tried. As soon as it begins to erase/write the PC will immediately restart, and I have to recover again. Im out of ideas

[Maxinator500]

Im out of ideas

Same

otherwise you need to use a programmer.

This is the performance which I cannot recommend.