[Request] Need to Mode CPU Microcode For PI945GCM

[maxsteel]

Hi.. I am having Mercury/Kobian PI945GCM board running Intel C2D E4600 Processor. Recently I
purchased an C2D E8400 which may not supported by this Motherboard. There are no new Bios
updates from The Manufacturer for this Board.
So its my Humble request to you to please Update or add some 45nm CPU Microcodes so it can
support all The Core 2 Due processors including 65nm and 45nm. I am adding CPUID screens and
Original Stock BIOS for the board avilable on the Manufacturar site.
Thanks.. Regards.

[DeathBringer]

It's offtopic here. CPU Support Upgrades is right place for it.
Your motherboard is OEM version of ECS 945GCT-M2/1333 (or ECS 945GCT-M2). You can try BIOS for them.

[maxsteel]

Hi.. thanks for replying DeathBringer.. sorry I wasn't aware of it as I am new here.
Are you saying I can flash above ECS boards bios files directly to my board? will that be safe? I am a noob sorry lol

[DeathBringer]

Are you saying I can flash above ECS boards bios files directly to my board? will that be safe?

Yes. Everything should be fine.

[maxsteel]

thanks man !! I'm gonna do it right now..hope doing so won't Bring Death to my MoBo lol.

[maxsteel]

okay.. the flash done perfectly... system boots like normal. But the problem remains the same still no display with E8400. I got it checked at local shop.. he used Zebronics 945 board to check..processor is Ok. what's the problem wid my board ppl? Help mere plzzz

[DeathBringer]

What's version of BIOS you flashed? Have you tried this: http://download.ecs.com.tw/dlfileecs/bio...1826A1.zip ?

[maxsteel]

Hi DeathBringer!! I flashes BIOS for... 945GCT-M2/1333 (PCB:1.x)
Version08/07/18. it didn't help me what do I do now??

[DeathBringer]

Try BSEL Mod (e.g. Intel LGA775 Pad Modding) to change FSB to 1066 Mhz.
You need change BSEL2 to Low. You may shortcut BSEL2 to BSEL1.

[maxsteel]

yup I flashed the same version.... I think