SLIC 2.1 Request MSI Z170 Gaming 5

[Merskies]

-Manufacturer: MSI
-Motherboard Model: Z170A GAMING M5
-Bios version: 1.4 
-Bios Type: AMI BIOS
-Bios Website: http://gaming.msi.com/products/motherboa...ing-series
-Bios Download Link: http://download.msi.com/bos_exe/7977v14.zip
-RW Everything Report : http://www.megafileupload.com/9jx0/AcpiTbls.rw

Hello, I am under the assumption if my bios supports the SLIC 2.1 stuff. I would be able to use my locked Windows 7 OEM key. Is that the purpose for modifying the bios? Or am I in the wrong general direction here? Also am not sure if i am in the correct forum. I am Still a noob .

~Thanks for the help in advance.

[sovem]

-Manufacturer: MSI
-Motherboard Model: Z170A GAMING M5
-Bios version: 1.4 
-Bios Type: AMI BIOS
-Bios Website: http://gaming.msi.com/products/motherboa...ing-series
-Bios Download Link: http://download.msi.com/bos_exe/7977v14.zip
-RW Everything Report : http://www.megafileupload.com/9jx0/AcpiTbls.rw

Hello, I am under the assumption if my bios supports the SLIC 2.1 stuff. I would be able to use my locked Windows 7 OEM key. Is that the purpose for modifying the bios? Or am I in the wrong general direction here? Also am not sure if i am in the correct forum. I am Still a noob .

~Thanks for the help in advance.

Z170A_GAMING_M5_7977v14_MSI21
https://app.box.com/s/6942ot5rze5cv6xlag67zuz8y62mpbj7

[Merskies]

Hello. I will state it again that i am a rookie at this. I may have made a rookie mistake, i may just not know exactly what i am doing. However i flashed the bios with this moddified bios and i now have:

EFI Specification Revision: 2.40
EFI Vendor: American Megatrends
EFI Revision: 5.11

This is what loads on the screen after I power on the machine: http://postimg.org/image/4v5cvezln/

I have no clue how to use this. I am stuck inside the shell. I am able to run commands it seems, not all of them. I am not sure what I did by flashing this. Could anyone out there please help me fix my mistake?

I would like to revert back to my old BIOS or figure out how to get this one to boot my windows 7.. 

Thank you very much..

[BDMaster]

There are many ways to Recover your Bios . . . I haven't most experience on MSI and
I haven't read your MoBo Specifications but I think It's a DUAL Bios so You can switch
on second Eeprom Chip and start again then switch your MoBo on Corrupted Bios and
Flash again the Original Bios to correct It !
Look here :

https://www.youtube.com/watch?v=pZ1u9xnSR38

https://www.youtube.com/watch?v=U5Qxv8-hYkw

https://forum-en.msi.com/index.php?topic=31222.0

How to Flash Bios on MSI :

https://www.youtube.com/watch?v=LRyFMf0D9Lc

http://www.msi.com/files/pdf/How_to_flash_the_BIOS.doc

Anoher way can be using an USB Formatted FAT32 and copying into the Original Bios file
then putting into the USB Port and switch on the pc !
Let me know
Regards

P.S. Write a PM to Sovem too !

[sovem]

Please try enter bios setting, set default and reboot.

[Merskies]

There are many ways to Recover your Bios . . . I haven't most experience on MSI and
I haven't read your MoBo Specifications but I think It's a DUAL Bios so You can switch
on second Eeprom Chip and start again then switch your MoBo on Corrupted Bios and
Flash again the Original Bios to correct It !
Look here :

https://www.youtube.com/watch?v=pZ1u9xnSR38

https://www.youtube.com/watch?v=U5Qxv8-hYkw

https://forum-en.msi.com/index.php?topic=31222.0

How to Flash Bios on MSI :

https://www.youtube.com/watch?v=LRyFMf0D9Lc

http://www.msi.com/files/pdf/How_to_flash_the_BIOS.doc

Anoher way can be using an USB Formatted FAT32 and copying into the Original Bios file
then putting into the USB Port and switch on the pc !
Let me know
Regards

P.S. Write a PM to Sovem too !

Thank you Thank you i will try this when i have time later and respond back to you.

[Merskies]

Please try enter bios setting, set default and reboot.

I am not sure how to even enter the bios anymore. ive tried exiting the shell promt and hitting buttons. with a windows 7 installation disk in it starts to run that. But no other button before the shell exist will open my bios nor will after exiting the shell prompt.

[sovem]

- Restart the computer.
- Press the "Delete" key while the system is booting up to enter the BIOS.
There is normally a message similar to "Press Del to enter SETUP," but it can flash by quickly.
On rare occasions, "F2" may be the BIOS key.
- Load default.
- Save & Exit